LM2679-5.0EVAL National Semiconductor, LM2679-5.0EVAL Datasheet - Page 10

• Manufacturer Part Number: LM2679-5.0EVAL
• Description: EVALUATION BOARD FOR LM2679-5.0
• Manufacturer: National Semiconductor
• Series: SIMPLE SWITCHER®r

Specifications of LM2679-5.0EVAL

• Main Purpose: DC/DC, Step Down
• Outputs And Type: 1, Non-Isolated
• Voltage - Output: 5V
• Current - Output: 5A
• Voltage - Input: 14 ~ 28V
• Regulator Topology: Buck
• Frequency - Switching: 260kHz
• Board Type: Fully Populated
• Utilized Ic / Part: LM2679
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Other names: *LM2679-5.0EVAL; LM2679-5.0-EVAL; LM2679-5.0-EVAL

www.national.com
DESIGN CONSIDERATIONS
Power supply design using the LM2679 is greatly simplified
by using recommended external components. A wide range
of inductors, capacitors and Schottky diodes from several
manufacturers have been evaluated for use in designs that
cover the full range of capabilities (input voltage, output volt-
age and load current) of the LM2679. A simple design proce-
dure using nomographs and component tables provided in
this data sheet leads to a working design with very little effort.
Alternatively, the design software, LM267X Made Simple
(version 6.0), can also be used to provide instant component
selection, circuit performance calculations for evaluation, a
bill of materials component list and a circuit schematic.
INDUCTOR
The inductor is the key component in a switching regulator.
For efficiency the inductor stores energy during the switch ON
time and then transfers energy to the load while the switch is
OFF.
Nomographs are used to select the inductance value required
for a given set of operating conditions. The nomographs as-
sume that the circuit is operating in continuous mode (the
FIGURE 2. Basic circuit for adjustable output voltage applications
FIGURE 1. Basic circuit for fixed output voltage applications.
10
The individual components from the various manufacturers
called out for use are still just a small sample of the vast array
of components available in the industry. While these compo-
nents are recommended, they are not exclusively the only
components for use in a design. After a close comparison of
component specifications, equivalent devices from other
manufacturers could be substituted for use in an application.
Important considerations for each external component and an
explanation of how the nomographs and selection tables were
developed follows.
current flowing through the inductor never falls to zero). The
magnitude of inductance is selected to maintain a maximum
ripple current of 30% of the maximum load current. If the ripple
current exceeds this 30% limit the next larger value is select-
ed.
The inductors offered have been specifically manufactured to
provide proper operation under all operating conditions of in-
put and output voltage and load current. Several part types
10084723
10084724