AT91EB63 Atmel, AT91EB63 Datasheet - Page 18

• Manufacturer Part Number: AT91EB63
• Description: ARM M63200 & M43300 EVAL KIT
• Manufacturer: Atmel
• Series: AT91SAM Smart ARMr
• Type: AT91 ARM Thumbr

Specifications of AT91EB63

• Contents: Evaluation Board, Cable, Power Jack, CD-ROM
• For Use With/related Products: AT91 63 & 43 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Appendix A – Configuration Straps
5-2
E3
Closed
Open
E4
Closed
Open
E5
2-3
1-2
E6
2-3
1-2
E7
1-2
2-3
E9
Closed
Open
E10
2-3
1-2
(1)
(1)
(1)
(1)
On-board Boot Chip Select
AT91 NCS0 select signal connected to the Flash memory.
AT91 NCS0 select signal not connected to the Flash memory. This
authorizes users to connect the corresponding select signal to their own
resources via the EBI expansion connector.
Push-button Enabling
SW1 - 4 inputs to the AT91 are valid.
SW1 - 4 inputs to the AT91 are not valid. This authorizes users to connect
the corresponding PIO to their own resources via the I/O expansion
connector.
Core Power Supply Selection
The AT91 core is powered by a 3.3V power supply.
The AT91 core is powered by a 1.8V power supply. In this case, the
maximum frequency that can be used is 25 MHz divided by 2 (position /2 on
E8).
JTAGSEL
AT91 standard ICE debug feature enabled.
IEEE 1149.1 JTAG boundary scan feature enabled.
User or Standard Boot Selection
The first half of the Flash memory is accessible at its base address.
The second half of the Flash memory is accessible at its base address. This
authorizes users to download their own application software in this part and
boot on it.
RS-232 Driver Enabled
The RS-232 transceivers are enabled.
The RS-232 transceivers are disabled. This authorizes users to connect the
corresponding PIO to their own resources via the I/O expansion connector.
MPI Chip Select Selection
When connecting the MPI expansion connector of this board to the EBI
expansion connector of another Atmel evaluation board, the MPI is selected
by the NCS2 select signal.
When connecting the MPI expansion connector of this board to the EBI
expansion connector of another Atmel evaluation board, the MPI is selected
by the NCS3 select signal.
AT91EB63 Evaluation Board User Guide