QV400D Quadravox Inc, QV400D Datasheet - Page 10

• Manufacturer Part Number: QV400D
• Description: CHIPCORDER PROTOTYPE TOOL KIT
• Manufacturer: Quadravox Inc
• Series: ChipCorder®r
• Type: Quadravox Prototyping Kitr

Specifications of QV400D

• Contents: Programmer Board with two empty ZIF Sockets, Cable, Power Supply, Software and Documentation
• For Use With/related Products: Winbond ChipCorder® Devices
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Quadravox
____________________________________________________________
____________________________________________________________
QV400D Installation
Quadravox
Minimum System Requirements:
Minimum Kit contents:
Software Installation
Hardware Installation:
8 MB Ram (16 MB and up preferred)
CPU Pentium 66 MHz (90 MHz and up preferred)
1.5 MB hard disk space (space for projects is additional)
1 floppy disk, containing all QV400D software and documentation (Help file).
1 programmer board, with two empty ZIF sockets
1 audio cable (6 ft, shielded, 1/8” stereo miniplug at both ends)
1 QV400D User’s Guide in PDF format
Standard Vocabulary (see Chapter 7): Available free from www.quadravox.com/support.htm.
Windows 3.11:
Windows 95, Windows 98:
Disconnect your PC sound card speakers cable from the sound card “Line Out” and plug it in the
audio jack J3 on the QV400D programmer board marked To MM Speaker (Multi Media Speaker).
Connect the supplied audio cable between your PC sound card “Line Out” and the audio jack J2 on
QV400D board marked From Sound Card. When not used, QV400D will act as a pass through for
your PC sound card speakers provided the power supply is connected and the QV400D software is
not running. You may also want to connect a local speaker (8 ohm) to the QV400D speaker output
jack J4 marked To Local Speaker.
Connect the power supply to your QV400D. If, for some reason, you are not using the power supply
shipped with the QV400D, please ensure that the supply used meets the following requirements:
9VDC output, 200 mA minimum current, center positive with a 2.1mm pin diameter.
Run QV400s1.exe from your file manager or from the icon just installed. You can invoke all help files
from within QV400SX. Don’t hesitate to drop us a line at our web site: www.quadravox.com.
2.1mm female plug, center positive (North American or European)
This version is no longer shipped. Customers can download the software from web page
www.quadravox.com (“support” section).
Put the floppy disk in your floppy drive, go to Windows File Manager, and run Setup.exe from the
floppy. The installation program will prompt the user for a directory name where the software will be
installed. All files related to this software will be installed in the same directory, except for the
QV400S1.ini file, which will be put in the Windows directory. The installation should take much less
than 5 minutes. It creates a Quadravox program group with one icon for QV400S1.exe. Please note
that the software can be run without the hardware being present. All the functions, except
programming and playback of ISD chips, are accessible.
WARNING: the ISD33000, 4000 and 5008 series chips cannot drive a speaker directly and
are not connected to the Local Speaker jack. You can only listen to the output of those
chips on your PC’s amplified speakers.
If you want to start with the sample project, see Chapter 6. Sample Project.
Chapter 2. Getting Started / Installation