QV400D Quadravox Inc, QV400D Datasheet - Page 37

• Manufacturer Part Number: QV400D
• Description: CHIPCORDER PROTOTYPE TOOL KIT
• Manufacturer: Quadravox Inc
• Series: ChipCorder®r
• Type: Quadravox Prototyping Kitr

Specifications of QV400D

• Contents: Programmer Board with two empty ZIF Sockets, Cable, Power Supply, Software and Documentation
• For Use With/related Products: Winbond ChipCorder® Devices
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Chapter 5. Universal Speech Tools : ISD Programming
Quadravox ISD1500 Adapter
Quadravox ISD1600 Adapter
Quadravox ISD5008 Adapter
1999
If the jumper is in the 2-message position (open), address 0 will be used for the first message, and
any address other than zero will be used for the second message.
A special adapter is required to program ISD1500 series chips on the QV400S / QV400D system.
This adapter must be plugged in the ZIF socket marked “ISD1000-ISD2500” on the QV400D board.
The 15xx chip can then be plugged in the adapter. The user should use the manual programming
dialog to program ISD15xx chips, since only one message can be recorded on those chips. For this
reason, the address for playback and recording in this dialog is ignored for ISD15xx chips.
The oscillator resistor is socketed to allow variation of the sample rate and hence playback length.
A special adapter is required to program ISD1600 series chips on the QV400S / QV400D system.
This adapter must be plugged in the socket marked “ISD1000-ISD2500” on the QV400D board. The
16xx chip can then be plugged in the adapter. The user should use the manual programming dialog to
program ISD16xx chips. One or two messages can be recorded on a 16xx chip, depending on the
position of a jumper on the adapter board. The user must use the manual recording dialog to take
advantage of this feature:
If the jumper is in the 1-message position (shorting), the record and playback addresses are ignored
in this dialog.
The oscillator resistor is socketed to allow variation of the sample rate and hence playback length.
A special adapter is required to program ISD5008 series chips on the QV400S / iQbox system. This
adapter must be plugged in the socket marked “ISD33XXX” on the QV400D board. The 5008-xx chip
can then be plugged in the adapter. The user can use the normal programming functions of QV400S
once this adapter is in place.
Quadravox, Inc
Quadravox, Inc
.
QV400D User’s Guide
37