ZGP323P4010ZAC Zilog, ZGP323P4010ZAC Datasheet
ZGP323P4010ZAC
Specifications of ZGP323P4010ZAC
Related parts for ZGP323P4010ZAC
ZGP323P4010ZAC Summary of contents
Page 1
... Development Platform User Manual Introduction Thank you for purchasing the ZiLOG Z8 GP In-Circuit Emulator (ICE) and Development Platform, ZGP323ICE15ZEM. The Z8 GP ICE provides Z8 GP family chip emulation with a trace and event system for program debugging using ZDS II development tools. Once your code is complete, use the included OTP programming module to burn your design to OTP devices ...
Page 2
... You can install other software and accompanying documentation later. 3. Follow the instructions on the screen to complete the installation receive free technical support, please register your software at http:// www.zilog.com. Access the registration page by opening the Support menu at the top of the web page and clicking “Product Registration.” Install the Hardware The Z8 GP ZGP323 ICE and Development Platform features an Ethernet interface and an RS-232 serial port ...
Page 3
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform • Connecting the Z8 GP ICE to the OTP programming module; and • Connecting the Z8 GP ICE to a PC. You may have to reconfigure network settings on the PC or ...
Page 4
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page 4 Connecting the Z8 GP ICE to the Target POD Once you have installed the appropriate target POD (and converter, if required) onto the target development board, connect the ...
Page 5
... Connect a 5VDC power supply to the Z8 GP ICE. The 3.3VDC should illuminate (see Figure 3). If the 3.3VDC LED fails to illuminate or the ICE Fail LED illuminates (see Figure 5), there is a problem with the unit. Contact ZiLOG support at http:// www.zilog.com for a replacement unit. OTP Programming ...
Page 6
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page 6 Figure ICE Front-Panel Configure the Hardware Configuring the Z8 GP ICE consists of selecting emulator jumper options and setting up Ethernet communications between the emulator ...
Page 7
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform Setting Up Ethernet Communications The default IP address and subnet mask of the Z8 GP ICE are 192.168.1.50 and 255.255.255.0, respectively. To enable communication between the PC running ZDSII and the Z8 ...
Page 8
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page 8 Configure the Hardware Figure 6. The Network Dialog UM019302-0407 ...
Page 9
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 2. In the panel labeled LAN or High-Speed Internet icon. The tion Local Area Connection Status Figure 7. The Local Area Connection Status Dialog UM019302-0407 User Manual , double-click the Local Area ...
Page 10
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page the Local Area Connection Status Area Connection Properties Figure 8. The Local Area Connection Properties Dialog Configure the Hardware dialog box, click the dialog box appears ...
Page 11
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 4. In the panel labeled This connection uses the following items: item to highlight it, and click the tocol (TCP/IP) dialog box appears (Figure 9). col (TCP/IP) Properties Figure 9. The Internet ...
Page 12
... All Rights Reserved clock enabled IP Address: 192.168.1.50 IP Subnet: 192.168.1.0/255.255.255.0 IP Gateway: 192.168.1.254 Z8 ICE Firmware x.x (Dec Copyright (C) 2001-2003 ZiLOG, Inc. All Rights Reserved. Press 'Ctl-Z' to enter configuration mode 7. Press ctrl-z. The emulator command prompt displays: eth1 % Note: The emulator console prompt is not case-sensitive. ...
Page 13
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform Command Description and Options ? Displays available emulator command shell options. debugport Configures the TCP port.Usage: debugport – displays current setting debugport tcp_port – sets debugport to specified TCP port. Example: debugport ...
Page 14
... Double-click in the Project Files window. main.c 3. Open Project –> Settings 4. In the tab, verify the General Running a Sample Project Start > ZiLOG ZDS II-Z8 GP Emula- c:\Program Files\ZiLOG File –> Open Project –> . field is set to CPU Family to exit the command exit . ledblink_c.pro ...
Page 15
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 5. In the tab, set the General 6. In the tab, select Debugger click the button. Configure 7. The Ethernet Configure Driver default IP address, 192.168.1.50. Enter the Z8 GP ICE IP ...
Page 16
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page 16 Using an Event to Stop Execution Events allow you to stop execution based on more complex conditions than a simple instruction address. The following events are available: • ...
Page 17
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 3. In the When: section, click the Program counter checkbox and set the Program Counter to 06B2 and the Mask to FFFF. 4. Click OK. 5. Open the Trace window by selecting ...
Page 18
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page 18 Peek/Poke Registers 1. ZDS II makes it easy for you to set and read emulator register contents. With the ledblink_c.pro project open and ZDS II connected to the ...
Page 19
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 2. Connect the OTP programming module to the emulator as described in “Connecting the Z8 GP ICE to the OTP Programming Module (Optional)” on page 4. 3. Select the OTP chip you ...
Page 20
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform User Manual Page you do not want to pad the hex file, select the None button in the Pad File With area. Otherwise, select the FF, 00, or Other ...
Page 21
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform 6. In ZDS II, open the project for the code you wish to burn onto the chip. 7. Select Tools --> OTP Programming to open the OTP window (Figure 12). Figure 12. ...
Page 22
... When the top LED is off, emulation has stopped. If the bottom LED is lit, the emulator is not functioning properly. Contact technical support at http://www.zilog.com for assistance. • The dual 3.3VDC/1.8VDC LED on the rear panel indicates the status of internal volt- ages. Both LEDs are normally illuminated when power is connected. • ...
Page 23
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform Connector J8 on the emulator front panel (see Figures 4 and 5) provides a ground connec- tion on all three pins. Connector J9 on the emulator front panel (see Figures 4 and ...
Page 24
... For In-Circuit Emulation, Order: 20-PDIP to 20-SSOP adapter from Ironwood, P/N: SOIC20-09. 28-PDIP to 28-SSOP adapter from Ironwood, P/N: SOIC28-08. ZGP323P4010ZAC and a 40-PDIP to 48- SSOP adapter from Ironwood, P/N: C5390. n/a, included in kit n/a, included in kit ZGP323P4010ZAC. 20-PDIP to 20-SOIC adapter from Ironwood, P/N: SOIC20-02. ...
Page 25
... ZiLOG, Inc. Terms and Conditions of Sale. ZiLOG, Inc. makes no warranty of merchantability or fitness for any purpose. Except with the express written approval of ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No licenses are conveyed, implicitly or otherwise, by this document under any intellectual property rights ...