G6KU-2F-Y DC3 Omron, G6KU-2F-Y DC3 Datasheet - Page 2

• Manufacturer Part Number: G6KU-2F-Y DC3
• Description: RELAY LATCH DPDT 3VDC SMD
• Manufacturer: Omron
• Series: G6Kr

Specifications of G6KU-2F-Y DC3

• Coil Type: Latching, Single Coil
• Coil Current: 33mA
• Relay Type: Telecom
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 1A @ 30VDC
• Coil Voltage: 3VDC
• Control On Voltage (max): 2.25 VDC
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Contact Form: DPDT
• Power Consumption: 100 mW
• Contact Carry Current: 1 A
• Maximum Switching Current: 1 A
• Contact Configuration: DPDT
• Contact Current Max: 1A
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Coil Voltage Vdc Nom: 3V
• Coil Resistance: 91ohm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Control Off Voltage (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: G6KU-2F-YDC3; G6KU-2F-YDC3; G6KU2FYDC3; Z3030

■ Coil Data
G6K- 2.5 mm coil-contact terminal spacing, standard, non-latching (G6K-2F, G6K-2G, G6K-2P)
G6K- 3.2 mm coil-contact terminal spacing, non-latching (G6K-2F-Y, G6K-2G-Y, G6K-2P-Y)
G6KU- 3.2 mm spacing, single coil latching (G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ± 10%.
■ Characteristics
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.
68
3
4.5
5
6
9
12
24
3
4.5
5
6
9
12
24
Contact resistance (See note 1)
Operate (set) time (See note 2)
Release (set) time (See note 2)
Insulation resistance (See note 3)
Dielectric strength
Surge withstand voltage “-Y’ versions
Vibration
Shock
Ambient temperature
Humidity
Service life
Weight
Rated voltage
Rated voltage
(VDC)
(VDC)
2. The operating characteristics are measured at a coil temperature of 23°C unless otherwise specified.
3. Pick-up voltage will vary with temperature
4. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.
2. Values in parentheses are typical values unless otherwise stated.
3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those for checking the dielectric strength.
4. Data shown are of initial value.
Low Signal Relay
33.0
23.2
21.1
17.6
11.3
9.1
4.6
33.0
23.2
21.1
17.6
11.3
9.1
4.6
Rated current
Rated current
(mA)
(mA)
Standard versions
Mechanical durability 10 to 55 Hz; 5.0 mm double amplitude
Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude
Mechanical durability 1,000 m/s
Malfunction durability 750 m/s
Mechanical
Electrical
91
194
237
341
795
1,315
5,220
91
194
237
341
795
1,315
5,220
Coil resistance
Coil resistance
G6K
(Ω)
(Ω)
100 mΩ max.
3 ms max. (Approx. 1.4 ms - standard. Approx. 1.2 ms - latching)
3 ms max. (Approx. 1.3 ms - standard. Approx. 1.2 ms - latching)
1,000 MΩ min. (at 500 VDC)
1,500 VAC for 1 minute between coil contacts
1,000 VAC for 1 minute between contacts of different poles
750 VAC for 1 minute between contacts of the same pole
2,500 V, (2 x 10 μs) between coil and contacts.
(Conforms to Bellcore specifications)
1,500 V, (10 x 160 μs) between coil and contacts / contacts of different and same polarity.
(Conforms to FCC Part 68)
-40°C to 70°C with no icing or condensation
5 to 85% RH
50,000,000 operations min. (at 36,000 operations per hour)
100,000 operations min. at rated load (at 1,800 operations per hour)
Approx. 0.7 g
80% max.
75% max.
Pick-up voltage
Set-up voltage
2
(approx. 75G)
2
(approx. 100G)
10% min.
75% min.
Dropout voltage
% of rated value
% of rated value
Reset voltage
150% max.
@ 23°C to 70°C
150% max.
@ 23°C to 70°C
Maximum voltage
Maximum voltage
Power consumption
Approx. 100
Power consumption
Approx. 100
(mW)
(mW)