GA355QR7GF332KW01L Murata Electronics North America, GA355QR7GF332KW01L Datasheet - Page 170

• Manufacturer Part Number: GA355QR7GF332KW01L
• Description: CAP CER 250VAC 3300PF X7R 2220
• Manufacturer: Murata Electronics North America
• Series: GFr

Specifications of GA355QR7GF332KW01L

• Capacitance: 3300pF
• Voltage - Rated: 250VAC
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: High Voltage
• Applications: Safety
• Ratings: X1Y2
• Package / Case: 2220 (5750 Metric)
• Size / Dimension: 0.224" L x 0.197" W (5.70mm x 5.00mm)
• Thickness: 1.50mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 490-3481-2

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
No.
11 Deflection
12
13
14
15
* "Room condition" Temperature: 15 to 35 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Medium Voltage High Capacitance for General Use Specifications and Test Methods
Continued from the preceding page.
Solderability of
Termination
Resistance
to Soldering
Heat
Temperature
Cycle
Humidity
(Steady
State)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Item
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Dielectric
Strength
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Dielectric
Strength
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Dielectric
Strength
No marking defects
75% of the terminations are to be soldered evenly and continuously.
Within 10%
0.025 max.
CU0.01 F: More than 100M • F
CF0.01 F: More than 10,000M
In accordance with item No.4
Within 7.5%
0.025 max.
CU0.01 F: More than 100M • F
CF0.01 F: More than 10,000M
In accordance with item No.4
Within 15%
0.05 max.
CU0.01 F: More than 10M • F
CF0.01 F: More than 1,000M
In accordance with item No.4
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
LZW
(mm)
1.0
1.2
2.2
2.2
3.5
4.5
a
Specifications
d
Fig. 2
100
Dimension (mm)
b
c
a
3.0
4.0
5.0
5.0
7.0
8.0
b
4.5
1.2
1.65
2.0
2.9
3.7
5.6
GRM Series Specifications and Test Methods
t : 1.6
c
1.0
d
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5 C Lead Free Solder (Sn-3.0Ag-0.5Cu)
Preheat the capacitor at 120 to 150 C * for 1 min.
Immerse the capacitor in solder solution at 260 5 C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
*Preheating for more than 3.2Z2.5mm
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24 2 hrs. at room condition,* then measure.
Let the capacitor sit at 40 2 C and relative humidity of 90 to 95%
for 500
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
•Immersing speed: 25 2.5mm/s
•Pretreatment
•Pretreatment
•Pretreatment
Perform a heat treatment at 150
let sit for 24 2 hrs. at room condition.*
Perform a heat treatment at 150
let sit for 24 2 hrs. at room condition.*
Perform a heat treatment at 150
let sit for 24 2 hrs. at room condition.*
Step
Step
+24
1
2
1
2
3
4
– 0
hrs.
Max. Operating Temp. 2
Min. Operating Temp. 3
235 5 C H60A or H63A Eutectic Solder
Temperature ( C)
Glass Epoxy Board
Temperature
R230
100 to 120 C
170 to 200 C
Room Temp.
Room Temp.
Capacitance meter
45
Test Method
20 50
Fig. 3
Fig. 4
Continued on the following page.
45
Pressurize
+ 0
+ 0
+ 0
–10
–10
–10
Pressurizing
speed: 1.0mm/s
Flexure=1
C for 60 5 min. and then
C for 60 5 min. and then
C for 60 5 min. and then
Solder resist
Cu
(in mm)
Time (min.)
1 min.
1 min.
2 to 3
2 to 3
Time
30 3
30 3
169
C02E.pdf
10.12.20