PIC16F72-I/ML Microchip Technology, PIC16F72-I/ML Datasheet - Page 511

• Manufacturer Part Number: PIC16F72-I/ML
• Description: IC PIC MCU FLASH 2KX14 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F72-I/ML

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Ram Memory Size: 128Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28QFN4 - SOCKET TRANS ICE 28QFN W/CABLEAC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PIC16F72-I/MLR; PIC16F72-I/MLR

Section 28. ICSP
28.2
Entering In-Circuit Serial Programming Mode
The device is placed into a program/verify mode by holding the RB6 and RB7 pins low while rais-
ing the MCLR (V
) pin from V
to V
(see programming specification) and having V
at the
PP
IL
IHH
DD
programming voltage. RB6 becomes the programming clock and RB7 becomes the program-
ming data. Both RB6 and RB7 are Schmitt Trigger inputs in this mode, and when RB7 is driving
data it is a CMOS output driver.
After reset, to place the device into programming/verify mode, the program counter (PC) is at
location 00h. A 6-bit command is then supplied to the device. Some commands then specify that
14-bits of program data are then supplied to or read from the device, depending on if the com-
mand was a load or a read. For complete details of serial programming, please refer to the device
specific Programming Specifications.
During the In-Circuit Serial Programming Mode, the WDT circuitry is disabled from generating a
device reset.
28
1997 Microchip Technology Inc.
DS31028A-page 28-3