AT90PWM3-16MQ Atmel, AT90PWM3-16MQ Datasheet - Page 155

• Manufacturer Part Number: AT90PWM3-16MQ
• Description: IC AVR MCU FLASH 8K 32QFN
• Manufacturer: Atmel
• Series: AVR® 90PWM Lightingr

Specifications of AT90PWM3-16MQ

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-QFN
• Processor Series: AT90PWMx
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRFBKIT, ATAVRISP2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• On-chip Dac: 10 bit, 1 Channel
• For Use With: ATSTK600-SOIC - STK600 SOCKET/ADAPTER FOR SOICATAVRMC200 - KIT EVAL FOR AT90PWM3 ASYNCATAVRFBKIT - KIT DEMO BALLAST FOR AT90PWM2ATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK520 - ADAPTER KIT FOR 90PWM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4317J–AVR–08/10
PSCOUTn0
PSCOUTn1
PSCn Input A
PSCn Input B
PSCOUTn0
PSCOUTn1
DT0
DT0
OT0
OT0
Figure 16-35. PSC behaviour versus PSCn Input A in Mode 14
The output frequency is not modified by the occurence of significative edge of retriggering input.
Figure 16-36. PSC behaviour versus PSCn Input B in Mode 14
The output is disactivated while retriggering input is active.
The output of the PSC is set to an inactive state and the corresponding ramp is not aborted. The
output stays in an inactive state while the Retrigger/Fault input is actve. The PSC runs at con-
stant frequency.
AT90PWM2/3 : The retrigger event is taken into account only if it occurs during the correspond-
ing On-Time. In the case of the retrigger event is not taken into account, the following active
outputs remains active, they are not desactivated.
DT1
DT1
OT1
OT1
DT0
DT0
OT0
OT0
DT1
DT1
OT1
OT1
DT0
DT0
OT0
OT0
DT1
DT1
AT90PWM2/3/2B/3B
OT1
OT1
DT0
DT0
OT0
OT0
DT1
DT1
OT1
OT1
155