PIC18F4455-I/PT Microchip Technology, PIC18F4455-I/PT Datasheet - Page 9

• Manufacturer Part Number: PIC18F4455-I/PT
• Description: IC PIC MCU FLASH 12KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4455-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 24KB (12K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 35
• Eeprom Size: 256 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 KB
• Interface Type: SPI, I2C, EAUSART
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163025
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPI3-DB18F4550 - BOARD DAUGHTER ICEPIC3DM163025 - PIC DEM FULL SPEED USB DEMO BRDAC164305 - MODULE SKT FOR PM3 44TQFP444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20. Module: EUSART
21. Module: EUSART
22. Module: EUSART
© 2008 Microchip Technology Inc.
Note:
In 9-Bit Asynchronous Full-Duplex Receive mode,
the received data may be corrupted if the TX9D bit
(TXSTA<0>) is not modified immediately after the
RCIDL bit (BAUDCON<6>) is set.
Work around
Write to TX9D only when a reception is not in prog-
ress (RCIDL = 1). Since there is no interrupt asso-
ciated with RCIDL, it must be polled in software to
determine when TX9D can be updated.
Date Codes that pertain to this issue:
All engineering and production devices.
After the last received byte has been read from the
EUSART receive buffer, RCREG, the value is no
longer valid for subsequent read operations.
Work around
The RCREG register should only be read once for
each byte received. After each byte is received
from the EUSART, store the byte into a user vari-
able. To determine when a byte is available to read
from RCREG, poll the RCIDL bit (BAUDCON<6>)
for a low-to-high transition, or use the EUSART
Receive Interrupt Flag, RCIF (PIR1<5>).
Date Codes that pertain to this issue:
All engineering and production devices.
With the auto-wake-up option enabled by setting
the
(PIR1<5>) bit will become set on a high-to-low
transition on the RX pin. However, the WUE bit
may not clear within 1 T
tion on RX. While the WUE bit is set, reading the
receive buffer, RCREG, will not clear the RCIF
interrupt flag. Therefore, the first opportunity to
automatically clear RCIF by reading RCREG may
take longer than expected.
Work around
There are two workarounds available:
1. Clear the WUE bit in software, after the wake-
2. Poll the WUE bit and read RCREG after the
Date Codes that pertain to this issue:
All engineering and production devices.
up event has occurred, prior to reading the
receive buffer, RCREG.
WUE bit is automatically cleared.
WUE
RCIF can only be cleared by reading
RCREG.
bit
(BAUDCON<1>),
CY
of a low-to-high transi-
the
PIC18F2455/2550/4455/4550
RCIF
23. Module: Timer1
24. Module: Reset
25. Module: ECCP (PWM Mode)
In 16-Bit Asynchronous Counter mode (with or
without use of the Timer1 oscillator), the TMR1H
and TMR3H buffers do not update when TMRxL is
read.
This issue only affects reading the TMRxH
registers. The timers increment and set the
interrupt flags as expected. The timer registers can
also be written as expected.
Work around
1. Use 8-bit mode by clearing the RD16 bit
2. Use the internal clock synchronization option
Date Codes that pertain to this issue:
All engineering and production devices.
This version of silicon does not support the func-
tionality described in Note 1 of parameter D002 in
Section 28.1 “DC Characteristics: Supply
Voltage” of the data sheet. The RAM content may
be altered during a Reset event if the following
conditions are met.
• Device is accessing RAM.
• Asynchronous Reset (i.e., WDT, BOR or
Work around
None
Date Codes that pertain to this issue:
All engineering and production devices.
When configured for half-bridge operation with
dead band (CCPxCON<7:6> = 10), the PWM
output may be corrupted for certain values of the
PWM duty cycle. This can occur when these
additional criteria are also met:
• a non-zero dead-band delay is specified
• the duty cycle has a value of 0 through 3, or
Work around
None.
Date Codes that pertain to this issue:
All engineering and production devices.
MCLR) occurs when a write operation is being
executed (start of a Q4 cycle) or if a RESET
instruction is executed and immediately
followed by a RETURN instruction.
(PDC6:PDC0 > 0); and
4n + 3 (n ≥ 1).
(T1CON<7>).
by clearing the T1SYNC bit (T1CON<2>).
DS80220J-page 9