PIC18F4220-I/PT Microchip Technology, PIC18F4220-I/PT Datasheet - Page 45

• Manufacturer Part Number: PIC18F4220-I/PT
• Description: IC MCU FLASH 2KX16 A/D 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4220-I/PT

• Core Size: 8-Bit
• Program Memory Size: 4KB (2K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 512Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 40 MHz
• Data Ram Size: 512 B
• Data Rom Size: 256 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 36
• Number Of Timers: 2 x 8 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 13
• Height: 1 mm
• Interface Type: SPI, I2C, USART
• Length: 10 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.2 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPAC164305 - MODULE SKT FOR PM3 44TQFP444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Lead Free Status / Rohs Status: Details

4.0
The PIC18F2X20/4X20 devices differentiate between
various kinds of Reset:
a)
b)
c)
d)
e)
f)
g)
h)
Most registers are unaffected by a Reset. Their status
is unknown on POR and unchanged by all other
Resets. The other registers are forced to a “Reset
state” depending on the type of Reset that occurred.
FIGURE 4-1:
© 2007 Microchip Technology Inc.
Note 1: This is the INTRC source from the internal oscillator block and is separate from the RC oscillator of the CLKI pin.
MCLR
OSC1
Power-on Reset (POR)
MCLR Reset while executing instructions
MCLR Reset when not executing instructions
Watchdog Timer (WDT) Reset (during
execution)
Programmable Brown-out Reset (BOR)
RESET Instruction
Stack Full Reset
Stack Underflow Reset
V
DD
RESET
2: See Table 4-1 for time-out situations.
Instruction
RESET
OST/PWRT
INTRC
Pointer
Stack
32 μs
( )_IDLE
Brown-out
Time-out
V
Detect
Sleep
DD
(1)
WDT
Reset
Rise
OST
SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT
PWRT
Stack Full/Underflow Reset
External Reset
10-Bit Ripple Counter
MCLRE
11-bit Ripple Counter
POR Pulse
BOREN
1024 Cycles
65.5 ms
PIC18F2220/2320/4220/4320
Most registers are not affected by a WDT wake-up
since this is viewed as the resumption of normal oper-
ation. Status bits from the RCON register, RI, TO, PD,
POR and BOR, are set or cleared differently in different
Reset situations as indicated in Table 4-2. These bits
are used in software to determine the nature of the
Reset. See Table 4-3 for a full description of the Reset
states of all registers.
A simplified block diagram of the on-chip Reset circuit
is shown in Figure 4-1.
The enhanced MCU devices have a MCLR noise filter
in the MCLR Reset path. The filter will detect and
ignore small pulses.
The MCLR pin is not driven low by any internal Resets,
including the WDT.
The MCLR input provided by the MCLR pin can be dis-
abled with the MCLRE bit in Configuration Register 3H
(CONFIG3H<7>). See Section 23.1 “Configuration
Bits” for more information.
S
R
DS39599G-page 43
Q
Enable OST
Enable PWRT
Chip_Reset
(2)