PIC18F4680-I/PT Microchip Technology, PIC18F4680-I/PT Datasheet - Page 299

• Manufacturer Part Number: PIC18F4680-I/PT
• Description: IC MCU FLASH 32KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4680-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.25 KB
• Interface Type: I2C/SPI/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 4
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163011
• Minimum Operating Temperature: - 25 C
• On-chip Adc: 11-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPI3-DB18F4680 - BOARD DAUGHTER ICEPIC3AC164305 - MODULE SKT FOR PM3 44TQFP444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 23-26: BnSIDL: TX/RX BUFFER n STANDARD IDENTIFIER REGISTERS,
REGISTER 23-27: BnSIDL: TX/RX BUFFER n STANDARD IDENTIFIER REGISTERS,
 2004 Microchip Technology Inc.
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
LOW BYTE IN RECEIVE MODE [0
LOW BYTE IN TRANSMIT MODE [0
bit 7
bit 7
Legend:
R = Readable bit
-n = Value at POR
Legend:
R = Readable bit
-n = Value at POR
SID2:SID0: Standard Identifier bits (if EXID = 0)
Extended Identifier bits EID20:EID18 (if EXID = 1).
SRR: Substitute Remote Transmission Request bit (only when EXID = 1)
1 = Remote transmission request occurred
0 = No remote transmission request occurred
EXID: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID10:SID0 are EID28:EID18)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘0’
EID17:EID16: Extended Identifier bits
SID2:SID0: Standard Identifier bits (if EXIDE = 0)
Extended Identifier bits EID20:EID18 (if EXIDE = 1).
Unimplemented: Read as ‘0’
EXIDE: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID10:SID0 are EID28:EID18)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘0’
EID17:EID16: Extended Identifier bits
R/W-x
Note 1: These registers are available in Mode 1 and 2 only.
Note 1: These registers are available in Mode 1 and 2 only.
SID2
SID2
R-x
R/W-x
SID1
SID1
R-x
PIC18F2585/2680/4585/4680
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
R/W-x
SID0
SID0
R-x
Preliminary
SRR
U-0
R-x
—
n
n
5, TXnEN (BSEL0<n>) = 0]
5, TXnEN (BSEL0<n>) = 1]
EXIDE
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-x
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EXID
R-x
U-0
U-0
—
—
x = Bit is unknown
x = Bit is unknown
EID17
EID17
R/W-x
R-x
DS39625B-page 297
(1)
(1)
EID16
R/W-x
EID16
R-x
bit 0
bit 0