LPC1764FBD100,551 NXP Semiconductors, LPC1764FBD100,551 Datasheet - Page 50

• Manufacturer Part Number: LPC1764FBD100,551
• Description: IC ARM CORTEX MCU 128K 100-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC17xxr

Specifications of LPC1764FBD100,551

• Program Memory Type: FLASH
• Program Memory Size: 128KB (128K x 8)
• Package / Case: 100-LQFP
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: CAN, Ethernet, I²C, IrDA, Microwire, SPI, SSI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC17
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, I2C, SPI, UART
• Maximum Clock Frequency: 100 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, MCB1760, MCB1760U, MCB1760UME, IRD-LPC1768-DEV, KSK-LPC1768-JL
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• On-chip Dac: 10 bit
• Package: 100LQFP
• Device Core: ARM Cortex M3
• Family Name: LPC1700
• Maximum Speed: 100 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4793; 935287919551

NXP Semiconductors
LPC1759_58_56_54_52_51
Product data sheet
11.5 I
Table 12.
T
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Symbol
f
t
t
t
t
t
2
amb
SCL
f
LOW
HIGH
HD;DAT
SU;DAT
C-bus
See the I
Parameters are valid over operating temperature range unless otherwise specified.
t
and the acknowledge.
A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the
V
C
The maximum t
output stage t
SDA and the SCL pins and the SDA/SCL bus lines without exceeding the maximum specified t
In Fast-mode Plus, fall time is specified the same for both output stage and bus timing. If series resistors
are used, designers should allow for this when considering bus timing.
The maximum t
the maximum of t
maximum must only be met if the device does not stretch the LOW period (t
clock stretches the SCL, the data must be valid by the set-up time before it releases the clock.
t
transmission and the acknowledge.
HD;DAT
SU;DAT
=
IH
b
−
= total capacitance of one bus line in pF.
(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL.
40
is the data hold time that is measured from the falling edge of SCL; applies to data in transmission
is the data set-up time that is measured with respect to the rising edge of SCL; applies to data in
°
Dynamic characteristic: I
C to +85
2
C-bus specification UM10204 for details.
Parameter
SCL clock
frequency
fall time
LOW period of
the SCL clock
HIGH period of
the SCL clock
data hold time
data set-up
time
f
All information provided in this document is subject to legal disclaimers.
is specified at 250 ns. This allows series protection resistors to be connected in between the
HD;DAT
f
for the SDA and SCL bus lines is specified at 300 ns. The maximum fall time for the SDA
VD;DAT
°
C.
could be 3.45 μs and 0.9 μs for Standard-mode and Fast-mode but must be less than
Rev. 6.01 — 11 March 2011
[2]
or t
VD;ACK
[4][5][6][7]
[3][4][8]
[9]
by a transition time (see the I
2
C-bus pins
Conditions
Standard-mode
Fast-mode
of both SDA and
SCL signals
Standard-mode
Fast-mode
Standard-mode
Fast-mode
Standard-mode
Fast-mode
Standard-mode
Fast-mode
Standard-mode
Fast-mode
LPC1759/58/56/54/52/51
[1]
32-bit ARM Cortex-M3 microcontroller
2
C-bus specification UM10204). This
Min
0
0
-
20 + 0.1 × C
4.7
1.3
4.0
0.6
0
0
250
100
LOW
b
) of the SCL signal. If the
© NXP B.V. 2011. All rights reserved.
Max
100
400
300
300
-
-
-
-
-
-
-
-
f
.
Unit
kHz
kHz
ns
ns
μs
μs
μs
μs
μs
μs
ns
ns
50 of 74