MC9S12H128VFVE Freescale Semiconductor, MC9S12H128VFVE Datasheet - Page 88

• Manufacturer Part Number: MC9S12H128VFVE
• Description: IC MCU 128K FLASH 16MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12H128VFVE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 99
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.25 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 144-LQFP
• Processor Series: S12H
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 6 KB
• Interface Type: CAN/I2C/SCI/SPI
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 99
• Number Of Timers: 8
• Operating Supply Voltage: - 0.3 V to + 6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 144LQFP
• Family Name: HCS12
• Maximum Speed: 16 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MC9S12H256 Device User Guide — V01.20
The PCB must be carefully laid out to ensure proper operation of the voltage regulator as well as of the
MCU itself. The following rules must be observed:
88
•
•
•
•
•
•
•
Every supply pair must be decoupled by a ceramic/tantalum capacitor connected as near as possible
to the corresponding pins(C1 – C9).
Central point of the ground star should be the VSS1 pin.
Use low ohmic low inductance connections between VSS1, VSS2, VSSA, VSSX1,2 and
VSSM1,2,3.
VSSPLL must be directly connected to VSS1.
Keep traces of VSSPLL, EXTAL and XTAL as short as possible and occupied board area for C10,
C11, C14 and Q1 as small as possible.
Do not place other signals or supplies underneath area occupied by C10, C11, C14 and Q1 and the
connection area to the MCU.
Central power input should be fed in at the VDDA/VSSA pins.
Component
C10
C11
C12
C13
C14
C1
C2
C3
C4
C5
C6
C7
C8
C9
R1
Q1
Table 21-1 Recommended Components
VDDPLL filter cap
PLL loop filter cap
PLL loop filter cap
Quartz/Resonator
PLL loop filter res
VDDM3 filter cap
VDDM2 filter cap
VDDM1 filter cap
VDDX2 filter cap
VDDX1 filter cap
VDDR filter cap
VDD1 filter cap
VDDA filter cap
OSC load cap
OSC load cap
DC cutoff cap
Purpose
X7R/tantalum
X7R/tantalum
X7R/tantalum
X7R/tantalum
X7R/tantalum
X7R/tantalum
X7R/tantalum
ceramic X7R
ceramic X7R
Type
See CRG Block User Guide
100nF .. 220nF
100 .. 220nF
>=100nF
>=100nF
>=100nF
>=100nF
>=100nF
>=100nF
>=100nF
Value