C8051F902-GU Silicon Laboratories Inc, C8051F902-GU Datasheet - Page 147
![IC MCU 8BIT 8KB FLASH 24QSOP](/photos/12/15/121586/c8051f9xx_24-qsop_sml.jpg)
C8051F902-GU
Manufacturer Part Number
C8051F902-GU
Description
IC MCU 8BIT 8KB FLASH 24QSOP
Manufacturer
Silicon Laboratories Inc
Series
C8051F9xxr
Specifications of C8051F902-GU
Program Memory Type
FLASH
Program Memory Size
8KB (8K x 8)
Package / Case
24-QSOP
Core Processor
8051
Core Size
8-Bit
Speed
25MHz
Connectivity
SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Number Of I /o
16
Ram Size
768 x 8
Voltage - Supply (vcc/vdd)
0.9 V ~ 3.6 V
Data Converters
A/D 15x10/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
C8051F9x
Core
8051
Data Ram Size
768 B
Interface Type
UART
Maximum Clock Frequency
25 MHz
Number Of Timers
4
Operating Supply Voltage
0.9 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
PK51, CA51, A51, ULINK2
Development Tools By Supplier
C8051F912DK
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit
Package
24QSOP
Device Core
8051
Family Name
C8051F90x
Maximum Speed
25 MHz
Data Bus Width
8 Bit
Number Of Programmable I/os
16
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
336-1849-5
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
C8051F902-GU
Manufacturer:
SEMIKRON
Quantity:
45
Company:
Part Number:
C8051F902-GU
Manufacturer:
Silicon Laboratories Inc
Quantity:
135
- Current page: 147 of 318
- Download datasheet (3Mb)
Note: By default, the VDD/DC+ supply is connected to VBAT upon entry into Sleep Mode (one-cell mode). If the
RAM and SFR register contents are preserved in sleep mode as long as the voltage on VBAT does not fall
below V
resume code execution upon waking up from Sleep mode. The following wake-up sources can be config-
ured to wake the device from sleep mode:
The Comparator0 Rising Edge wakeup is only valid in two-cell mode. The comparator requires a supply
voltage of at least 1.8 V to operate properly. On ‘F912 and ‘F902 devices, the VBAT supply monitor can be
disabled to save power by writing 1 to the MONDIS (PMU0MD.5) bit. When the VBAT supply monitor is
disabled, all reset sources will trigger a full POR and will re-enable the VBAT supply monitor.
In addition, any falling edge on RST (due to a pin reset or a noise glitch) will cause the device to exit sleep
mode. In order for the MCU to respond to the pin reset event, software must not place the device back into
sleep mode for a period of 15 µs. The PMU0CF register may be checked to determine if the wake-up was
due to a falling edge on the RST pin. If the wake-up source is not due to a falling edge on RST, there is no
time restriction on how soon software may place the device back into sleep mode. A 4.7 k pullup resistor
to VDD/DC+ is recommend for RST to prevent noise glitches from waking the device.
14.6. Configuring Wakeup Sources
Before placing the device in a low power mode, one or more wakeup sources should be enabled so that
the device does not remain in the low power mode indefinitely. For Idle Mode, this includes enabling any
interrupt. For Stop Mode, this includes enabling any reset source or relying on the RST pin to reset the
device.
Wake-up sources for suspend and sleep modes are configured through the PMU0CF register. Wake-up
sources are enabled by writing 1 to the corresponding wake-up source enable bit. Wake-up sources must
be re-enabled each time the device is placed in suspend or sleep mode, in the same write that places the
device in the low power mode.
The reset pin is always enabled as a wake-up source. On the falling edge of RST, the device will be
awaken from sleep mode. The device must remain awake for more than 15 µs in order for the reset to take
place.
SmaRTClock Oscillator Fail
SmaRTClock Alarm
Port Match Event
Comparator0 Rising Edge.
VDDSLP bit (DC0CF.1) is set to logic 1, the VDD/DC+ supply will float in Sleep Mode. This allows the
decoupling capacitance on the VDD/DC+ supply to maintain the supply rail until the capacitors are discharged.
For relatively short sleep intervals, this can result in substantial power savings because the decoupling
capacitance is not continuously charged and discharged.
POR
. The PC counter and all other volatile state information is preserved allowing the device to
Rev. 1.0
C8051F91x-C8051F90x
147
Related parts for C8051F902-GU
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![500SAAB8M00000ACF](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
SMD/C°/SINGLE-ENDED OUTPUT SILICON OSCILLATOR
Manufacturer:
Silicon Laboratories Inc
![SI3210MFT](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4010-DAAKF_868](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/SI4010 AES KEYFOB DEMO WITH LCD RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4010-DASKF_868](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/SI4010 SIMPLIFIED KEY FOB DEMO WITH LED RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4432-SEB1 C 915](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A/-40 TO 85 OC/EZLINK MODULE; F930/4432 HIGH BAND (REV E/B1)
Manufacturer:
Silicon Laboratories Inc
![4432-SEB1 D 470](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
EZLink Module; F930/4432 Low Band (rev e/B1)
Manufacturer:
Silicon Laboratories Inc
![4460-TCE10D434-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4460 10 DBM RADIO TEST CARD 434 MHZ
Manufacturer:
Silicon Laboratories Inc
![4461-TSQ14D868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4461 14 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE20C460-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RFSWITCH RADIO TEST CARD 460 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE20C868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE27F868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 27 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE30E915S-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 SKYWORKS 30 DBM RADIO TEST CARD 915 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE30E915R-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/-40 TO 85 OC/4463 RFMD 30 DBM RADIO TEST CARD 915 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TSQ20D169-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RADIO TEST CARD 169 MHZ
Manufacturer:
Silicon Laboratories Inc