MC9S08LC36LH Freescale Semiconductor, MC9S08LC36LH Datasheet - Page 156

• Manufacturer Part Number: MC9S08LC36LH
• Description: IC MCU 36K FLASH 2K RAM 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08LC36LH

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LCD, LVD, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 36KB (36K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 2x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 64-LQFP
• Processor Series: S08LC
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2.5 KB
• Interface Type: I2C/SCI/SPI1/SPI2
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 18
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2-ch x 12-bit
• For Use With: DEMO9S08LC60 - BOARD DEMO FOR 9S08LC60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 9 Liquid Crystal Display Driver (S08LCDV1)
9.5.1
The list below provides a recommended initialization sequence for the LCD module.
156
1. LCDCLKS register
2. LCDSUPPLY register
3. LCDCR1 register
4. LCDCR0 register
5. LCDBCTL register
6. FPENR[5:0] register
7. LCDCR0 register
a) Configure LCD clock source (SOURCE bit)
b) Adjust the clock source to achieve a value for LCDCLK of ~ 32 kHz (CLKADJ[5:0] & DIV16)
a) Enable charge pump (LCDCPEN bit)
b) Configure the LCD module for doubler or tripler mode (LCDCPMS bit)
c) Configure charge pump clock (CPCADJ[1:0])
d) Configure HDRVBUF
e) Configure op amp switch (BBYPASS bit)
f) Configure LCD power supply (VSUPPLY[1:0])
a) Configure the LCD frame frequency interrupt (LCDIEN bit)
b) Configure LCD behavior in low power mode (LCDWAI and LCDSTP3 bits)
a) Configure LCD duty cycle (DUTY[1:0])
b) Configure LPWAVE
c) Select and configure the LCD frame frequency (LCLK[2:0])
a) Configure the blink mode to blink individual or blink all segments (BLKMODE bit)
b) Configure the blink frequency (BRATE[2:0])
a) Enable the LCD module frontplane waveform output (FP[40:0]EN bits)
a) Enable the LCD module (LCDEN bit)
Initialization Sequence
MC9S08LC60 Series Data Sheet: Technical Data, Rev. 4
Freescale Semiconductor