ATTINY28L-4AU Atmel, ATTINY28L-4AU Datasheet - Page 20

• Manufacturer Part Number: ATTINY28L-4AU
• Description: IC MCU AVR 2K FLASH 4MHZ 32-TQFP
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY28L-4AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 11
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-TQFP, 32-VQFP
• Processor Series: ATTINY2x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 32 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 11
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Package: 32TQFP
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 4 MHz
• Ram Size: 32 Byte
• Operating Supply Voltage: 3.3|5 V
• For Use With: ATSTK600-DIP40 - STK600 SOCKET/ADAPTER 40-PDIPATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Ram Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

Interrupts
Reset and Interrupt
Interrupt Handling
20
ATtiny28L/V
The ATtiny28 provides five different interrupt sources. These interrupts and the reset
vector each have a separate program vector in the program memory space. All the inter-
rupts are assigned to individual enable bits. In order to enable the interrupt, both the
individual enable bit and the I-bit in the status register (SREG) must be set to one.
The lowest addresses in the program memory space are automatically defined as the
Reset and Interrupt vectors. The complete list of vectors is shown in Table 7. The list
also determines the priority levels of the different interrupts. The lower the address, the
higher the priority level. RESET has the highest priority, and next is INT0 – the External
Interrupt Request 0.
Table 7. Reset and Interrupt Vectors
The most typical and general program setup for the Reset and Interrupt vector
addresses are:
The ATtiny28 has one 8-bit Interrupt Control Register (ICR).
When an interrupt occurs, the Global Interrupt Enable I-bit is cleared (zero) and all inter-
rupts are disabled. The user software can set (one) the I-bit to enable nested interrupts.
The I-bit is set (one) when a Return from Interrupt instruction (RETI) is executed.
When the program counter is vectored to the actual interrupt vector in order to execute
the interrupt handling routine, hardware clears the corresponding flag that generated the
interrupt. Some of the interrupt flags can also be cleared by writing a logical “1” to the
flag bit position(s) to be cleared.
Vector
Address
$000
$001
$002
$003
$004
$005
;
$006
No.
1
2
3
4
5
6
…
Labels
MAIN:
…
Program
Address
$000
$001
$002
$003
$004
$005
Code
rjmp
rjmp
rjmp
rjmp
rjmp
rjmp
<instr>
…
Source
RESET
INT0
INT1
Input Pins
TIMER0,
OVF0
ANA_COMP
xxx
RESET
EXT_INT0
EXT_INT1
LOW_LEVEL
TIM0_OVF
ANA_COMP
…
Interrupt Definition
Hardware Pin, Power-on Reset and
Watchdog Reset
External Interrupt Request 0
External Interrupt Request 1
Low-level Input on Port B
Timer/Counter0 Overflow
Analog Comparator
Comments
; Reset handler
; IRQ0 handler
; IRQ1 handler
; Low level input handler
; Timer0 overflow handle
; Analog Comparator handle
; Main program start
1062F–AVR–07/06