PIC18F2331-E/MM Microchip Technology, PIC18F2331-E/MM Datasheet - Page 245

• Manufacturer Part Number: PIC18F2331-E/MM
• Description: IC MCU FLASH 4KX16 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2331-E/MM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-QFN
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 40 MHz
• Data Ram Size: 768 B
• Data Rom Size: 256 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 24
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 5
• Height: 0.88 mm
• Interface Type: EUSART, I2C, SPI, SSP
• Length: 6 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V, 5.8 V
• Supply Voltage (min): 3.9 V, 4.2 V
• Width: 6 mm
• For Use With: I3-DB18F4431 - BOARD DAUGHTER ICEPIC3
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Other names: PIC18F2331-E/ML; PIC18F2331-E/ML

REGISTER 21-6:
REGISTER 21-7:
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-1
bit 0
Note 1:
ANS7
R/W-1
U-0
—
2:
2:
(2)
Setting a pin to an analog input disables the digital input buffer. The corresponding TRIS bit should be set
for an input and cleared for an output (analog or digital). The ANSx bits directly correspond to the ANx pins
(e.g., ANS0 = AN0, ANS1 = AN1, etc.). Unused ANSx bits are read as ‘0’.
ANS7 through ANS5 are available only on PIC18F4331/4431 devices.
Setting a pin to an analog input disables the digital input buffer. The corresponding TRIS bit should be set
for an input and cleared for an output (analog or digital). The ANSx bits directly correspond to the ANx pins
(e.g., ANS8 = AN8, ANS9 = AN9, etc.). Unused ANSx bits are read as ‘0’.
ANS8 is available only on PIC18F4331/4431 devices.
ANS<7:0>: Analog Input Function Select bits
Correspond to pins, AN<7:0>.
1 = Analog input
0 = Digital I/O
Unimplemented: Read as ‘0’
ANS8: Analog Input Function Select bit
1 = Analog input
0 = Digital I/O
ANS6
R/W-1
U-0
—
ANSEL0: ANALOG SELECT REGISTER 0
ANSEL1: ANALOG SELECT REGISTER 1
(2)
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
ANS5
R/W-1
U-0
—
(2)
PIC18F2331/2431/4331/4431
R/W-1
ANS4
U-0
—
(2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-1
ANS3
U-0
—
(1)
(1)
R/W-1
ANS2
U-0
—
x = Bit is unknown
x = Bit is unknown
R/W-1
ANS1
U-0
—
DS39616D-page 245
ANS8
R/W-1
R/W-1
ANS0
(2)
bit 0
bit 0