AT32UC3B164-AUT Atmel, AT32UC3B164-AUT Datasheet - Page 378

• Manufacturer Part Number: AT32UC3B164-AUT
• Description: IC MCU AVR32 64KB FLASH 48-TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B164-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 28
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Controller Family/series: AT32UC3B
• No. Of I/o's: 28
• Ram Memory Size: 16KB
• Cpu Speed: 60MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• For Use With: ATSTK600-TQFP48 - STK600 SOCKET/ADAPTER 48-TQFPATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATEVK1101 - KIT DEV/EVAL FOR AVR32 AT32UC3B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

22.7.1.7
32059I–06/2010
Pad Suspend
• When the user write a one to the ALLOC bit, the Configuration OK Status bit in the Endpoint n
Figure 22-9 on page 378
Figure 22-9. Pad Behavior
• In the Idle state, the pad is put in low power consumption mode, i.e., the differential receiver of
• In the Active state, the pad is working.
Figure 22-10 on page 378
Figure 22-10. Pad Events
as far as nothing has been written or received into them while changing the allocation state of
the first pipe/endpoint.
Status register (UESTAn.CFGOK) is set only if the configured size and number of banks are
correct compared to their maximal allowed values for the endpoint and to the maximal FIFO
size (i.e. the DPRAM size), so the value of CFGOK does not consider memory allocation
conflicts.
the USB pad is off, and internal pull-down with strong value(15K) are set in both DP/DM to
avoid floating lines.
SUSP
WAKEUP
PAD State
shows the pad behavior.
illustrates the pad events leading to a PAD state change.
Suspend detected
Active
Idle
| DETACH = 1
| Suspend
USBE = 0
Wake-up detected
Idle
& DETACH = 0
& Suspend
USBE = 1
Cleared on wake-up
Active
Cleared by software to acknowledge the interrupt
Active
AT32UC3B
378