ATMEGA644V-10MUR Atmel, ATMEGA644V-10MUR Datasheet - Page 48

• Manufacturer Part Number: ATMEGA644V-10MUR
• Description: MCU AVR 64K FLASH 10MHZ 44QFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA644V-10MUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.2.4
9.3
9.3.1
48
Internal Voltage Reference
ATmega644
Watchdog Reset
Voltage Reference Enable Signals and Start-up Time
Figure 9-5.
When the Watchdog times out, it will generate a short reset pulse of one CK cycle duration. On
the falling edge of this pulse, the delay timer starts counting the Time-out period t
”Watchdog Timer” on page 49
Figure 9-6.
ATmega644 features an internal bandgap reference. This reference is used for Brown-out
Detection, and it can be used as an input to the Analog Comparator or the ADC.
The voltage reference has a start-up time that may influence the way it should be used. The
start-up time is given in
reference is not always turned on. The reference is on during the following situations:
1. When the BOD is enabled (by programming the BODLEVEL [2:0] Fuse).
2. When the bandgap reference is connected to the Analog Comparator (by setting the
3. When the ADC is enabled.
Thus, when the BOD is not enabled, after setting the ACBG bit or enabling the ADC, the user
must always allow the reference to start up before the output from the Analog Comparator or
ADC is used. To reduce power consumption in Power-down mode, the user can avoid the three
conditions above to ensure that the reference is turned off before entering Power-down mode.
ACBG bit in ACSR).
CC
Brown-out Reset During Operation
Watchdog Reset During Operation
INTERNAL
TIME-OUT
RESET
RESET
V
CC
”System and Reset Characteristics” on page
for details on operation of the Watchdog Timer.
V
CK
BOT-
V
t
TOUT
BOT+
320. To save power, the
2593N–AVR–07/10
TOUT
. Refer to