PIC18F2320-E/SP Microchip Technology, PIC18F2320-E/SP Datasheet - Page 148

• Manufacturer Part Number: PIC18F2320-E/SP
• Description: IC MCU FLASH 4KX16 EEPROM 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2320-E/SP

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F2220/2320/4220/4320
16.4.3
In Full-Bridge Output mode, four pins are used as out-
puts; however, only two outputs are active at a time. In
the Forward mode, pin RC2/CCP1/P1A is continuously
active and pin RD7/PSP7/P1D is modulated. In the
Reverse mode, RD6/PSP6/P1C pin is continuously
active and RD5/PSP5/P1B pin is modulated. These are
illustrated in Figure 16-6.
FIGURE 16-6:
DS39599G-page 146
Note 1: At this time, the TMR2 register is equal to the PR2 register.
Note
FORWARD MODE
REVERSE MODE
2: Output signal is shown as active-high.
P1A
P1B
P1C
P1D
P1A
P1B
P1C
P1D
FULL-BRIDGE MODE
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
FULL-BRIDGE PWM OUTPUT
(1)
(1)
Duty Cycle
Duty Cycle
Period
Period
P1A, P1B, P1C and P1D outputs are multiplexed with
the PORTC<2> and PORTD<5:7> data latches. The
TRISC<2> and TRISD<5:7> bits must be cleared to
make the P1A, P1B, P1C and P1D pins output.
(1)
(1)
© 2007 Microchip Technology Inc.