AT91SAM9G46-CU Atmel, AT91SAM9G46-CU Datasheet - Page 27

• Manufacturer Part Number: AT91SAM9G46-CU
• Description: IC ARM9 MCU 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G46-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

7.3
7.3.1
7.3.2
11028CS–ATARM–8-Apr-11
External Memories
DDRSDRC0 Multi-port DDRSDR Controller
External Bus Interface
The SAM99G46 features a Multi-port DDR2 Interface and an External Bus Interface allowing to
connect to a wide range of external memories and to any parallel peripheral.
Four AHB Interfaces, Management of All Accesses Maximizes Memory Bandwidth and Mini-
mizes Transaction Latency.
• Supports AHB Transfers:
• Supports DDR2, LPDDR
• Numerous Configurations Supported
• Programming Facilities
• Energy-saving Capabilities
• Power-up Initialization by Software
• CAS Latency of 2, 3 Supported
• Reset function supported (DDR2)
• Auto Precharge Command Not Used
• On Die Termination not supported
• OCD mode not supported
• Integrates Three External Memory Controllers:
• Additional logic for NAND Flash and CompactFlash
• Optional Full 32-bit External Data Bus
• Up to 26-bit Address Bus (up to 64MBytes linear per chip select)
• Up to 6 chip selects, Configurable Assignment:
– Word, Half Word, Byte Access.
– 2K, 4K, 8K, 16K Row Address Memory Parts
– DDR2 with Four Internal Banks
– DDR2/LPDDR with 16-bit Data Path
– One Chip Select for DDR2/LPDDR Device (256 Mbytes Address Space)
– Multibank Ping-pong Access (Up to 4 Banks Opened at Same Time = Reduces
– Timing Parameters Specified by Software
– Automatic Refresh Operation, Refresh Rate is Programmable
– Automatic Update of DS, TCR and PASR Parameters
– Self-refresh, Power-down and Deep Power Modes Supported
– Static Memory Controller
– DDR2/SDRAM Controller
– SLC Nand Flash ECC Controller
– Static Memory Controller on NCS0
– DDR2/SDRAM Controller (SDCS) or Static Memory Controller on NCS1
– Static Memory Controller on NCS2
Average Latency of Transactions)
TM
SAM9G46
27