DSPIC30F6012T-20E/PF Microchip Technology, DSPIC30F6012T-20E/PF Datasheet - Page 11

• Manufacturer Part Number: DSPIC30F6012T-20E/PF
• Description: IC DSPIC MCU/DSP 144K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6012T-20E/PF

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TQFP, 64-VQFP
• For Use With: XLT64PT4 - SOCKET TRAN ICE 64MQFP/TQFPAC164313 - MODULE SKT FOR PM3 64PFAC30F002 - MODULE SOCKET DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F6012T20EP

19. Module: Regulating Voltage for
TABLE 2:
Note: Applications that use the CAN peripherals and data EEPROM should also refer to Errata module 1 and 17.
20. Module: dsPIC30F6011/dsPIC30F6013
21. Module: 4x PLL Operation
© 2008 Microchip Technology Inc.
For this release of silicon, applications operating
off 5 volts V
remains between 4.75V and 5.5V. For 5V
applications, Table 2 summarizes the maximum
MIPS that can be achieved across various
temperatures.
Work around
For 5 volt applications, use a voltage regulator that
ensures V
to achieve 30 MIPS operation.
Addresses in the range, 0x6000 through 0xFFFF,
may not be code-protected for this revision of
dsPIC30F6011 and dsPIC30F6013 silicon.
Work around
None.
When the 4x PLL mode of operation is selected,
the specified input frequency range of 4-10 MHz is
not fully supported.
When device V
frequency must be in the range of 4-5 MHz. When
device V
frequency must be in the range of 4-6 MHz for both
industrial and extended temperature ranges.
Work around
1. Use 8x PLL or 16x PLL mode of operation and
2. Use the EC without PLL Clock mode with a
V
4.75 to 5.5
4.75 to 5.5
(in volts)
DD
set final device clock speed using the
POST<1:0> oscillator postscaler control bits
(OSCCON<7:6>).
suitable
equivalent 4x PLL clock rate.
Range
DD
DD
5V/30 MIPS Applications
Code Protection
OPERATING MIPS VS. VOLTAGE
DD
is in the range 4.75V to 5.5V, in order
clock
is 3.0V-3.6V, the 4x PLL input
at 30 MIPS should ensure the V
DD
is 2.5V-3.0V, the 4x PLL input
frequency
Temp Range
-40 to +125
-40 to +85
(in °C)
to
dsPIC30F6011/6012/6013/6014
obtain
dsPIC30FXXX-30I
the
DD
30
—
dsPIC30FXXX-20I
Max MIPS
20
—
dsPIC30FXXX-20E
DS80198J-page 11
20
—