ST7FLITE35F2B6 STMicroelectronics, ST7FLITE35F2B6 Datasheet - Page 170

• Manufacturer Part Number: ST7FLITE35F2B6
• Description: IC MCU 8BIT 8K FLASH 20DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
#ifdef _HIWARE_
#pragma TRAP_PROC SAVE_REGS
#else
#ifdef _COSMIC_
@interrupt
#else
#error "Unsupported Compiler!"
#endif
#endif
void PWMART_IT_Routine(void)
{
}
170/235
-----------------------------------------------------------------------------*/
unsigned char CAP1_Value;
unsigned char i,Temp;
if(PWMART_Status_Flag(PWMART_FLAG_OVF) == TRUE)
{
}
if (PWMART_Status_Flag (PWMART_FLAG_ICF1)== TRUE)
{
}
main Tree and the interrupt Tree, the function Re-entrant error
occurs in case COSMIC compiler is used with models other than
stack models.
PWMART_Clear_Flag(PWMART_FLAG_OVF);
PWMART_Clear_Flag(PWMART_FLAG_ICF1);
CAP1_Value = PWMART_ICAP_Getvalue(PWMART_ICAP_1);
IO_Output (IO_PUSH_PULL,IO_PORT_C,IO_PIN_0);
IO_Write (IO_PORT_C,IO_PIN_0,IO_DATA_HIGH);
for ( i=0;i<=250;i++)
{
}
IO_Write (IO_PORT_C,IO_PIN_0,IO_DATA_LOW);
Nop
/* call to get capture value and also clear ICF1 */
/* additional registers will be saved */
/* Compiler Defines not found! */
/* test for HIWARE Compiler */
/* test for Cosmic Compiler */
/* call only to clear ICF1 */
/* call only to clear OVF */
/* Routine for user code */
/* Turn ON LED at PC0 */
/* Turn ON LED at PC0 */
/* delay */