ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 215

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 163. EEPROM_Read
Notes:
– The value of *PtrToE2Buffer can be from 0x1000h to 0x107Fh for LITE0/1/2/3,
– You have to type-cast parameter PtrToE2Buffer to unsigned char * in the function
– Because of the limitation of ST7FLite0/1/2/3, ST7SUPERLITE and ST7DALI ZRAM and
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Input Parameter 3
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
ST7SUPERLITE and ST7DALI device.
EEPROM_Read as shown in example (page 218).
RAM size (which is 64 bytes each), you must take care while declaring the size of user buffer.
EEPROM_Read
For Metrowerks,
void EEPROM_Read (unsigned char * PtrToUsrBuffer,
unsigned char NbOfBytes, unsigned char * far
PtrToE2Buffer)
For Cosmic,
void EEPROM_Read (unsigned char * PtrToUsrBuffer,
unsigned char NbOfBytes, @near unsigned char *
PtrToE2Buffer)
Reads data from EEPROM memory and stores it in the
user buffer.
*PtrToUsrBuffer
User address, where data has to be stored.
NbOfBytes
Number of bytes you want to read from EEPROM memory
*PtrToE2Buffer
EEPROM memory address, from where data has to be
read.
None
None
None
None
None
Function Descriptions
215/235