ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 94

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 56. I2C_GetBuffer
Notes:
– The above function is only for I2C Interrupt driven mode.
– ACK bit is managed automatically inside this routine.
– STOP bit is set automatically inside this routine, before the last byte is read. So there is no
Caution:
– Take care not to access the string until reception completion.
– Any data received before calling this function is ignored.
– The data reception will stop if any error occurs during reception.
– In String reception, the NULL character must be taken into account.
94/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
need to call I2C_Generate_Stop after this.
I2C_GetBuffer
Void I2C_GetBuffer (unsigned char *PtrToBuffer, un-
signed char NbOfBytes)
Starts reception of data and stores it in user defined area
for I2C Interrupt driven mode.
*PtrToBuffer
Start address of the user buffer.
NbOfBytes
Number of bytes to be received.
None
1. I2C_Load_Address must have been called (If I2C is
configured in master receiver mode).
2. You must define I2C Interrupt driven mode in
ST7lib_config.h.
3. I2C_IsReceptionCompleted must have been called to
ensure that there are no pending requests.
4. You must enable interrupts for this mode.
5. In I2C Interrupt driven mode, I2C_IT_Function must
have been called in the Interrupt service routine.
None
I2C_IsReceptionCompleted must be called after this func-
tion to get the status of reception.
I2C_GetBuffer (I2C Polling mode)