ST62T09CB6 STMicroelectronics, ST62T09CB6 Datasheet - Page 42

• Manufacturer Part Number: ST62T09CB6
• Description: IC MCU 8BIT W/ADC 20-PDIP
• Manufacturer: STMicroelectronics
• Series: ST6r

Specifications of ST62T09CB6

• Core Processor: ST6
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, WDT
• Number Of I /o: 12
• Program Memory Size: 1KB (1K x 8)
• Program Memory Type: OTP
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 6 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST62T0x
• Core: ST6
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 2
• Operating Supply Voltage: 3 V to 6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

ST6208C/ST6209C/ST6210C/ST6220C
8 ON-CHIP PERIPHERALS
8.1 WATCHDOG TIMER (WDG)
8.1.1 Introduction
The Watchdog timer is used to detect the occur-
rence of a software fault, usually generated by ex-
ternal interference or by unforeseen logical condi-
tions, which causes the application program to
abandon its normal sequence. The Watchdog cir-
cuit generates an MCU reset on expiry of a pro-
grammed time period, unless the program refresh-
es the counter’s contents before the SR bit be-
comes cleared.
Figure 25. Watchdog Block Diagram
42/104
1
f
int /12
bit 7
T0
WATCHDOG REGISTER (WDGR)
T1
7-BIT DOWNCOUNTER
T2
CLOCK DIVIDER
T3
÷ 256
T4
8.1.2 Main Features
■
■
■
■
Programmable timer (64 steps of 3072 clock
cycles)
Software reset
Reset (if watchdog activated) when the SR bit
reaches zero
Hardware or software watchdog activation
selectable by option bit (Refer to the option
bytes section)
T5
SR
RESET
bit 0
C