STM8L151K4T6 STMicroelectronics, STM8L151K4T6 Datasheet - Page 120

• Manufacturer Part Number: STM8L151K4T6
• Description: IC MCU 8BIT 16KB FLASH 32LQFP
• Manufacturer: STMicroelectronics
• Series: STM8L EnergyLiter

Specifications of STM8L151K4T6

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, IR, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 22x12b, D/A 1x12
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Processor Series: STM8L15x
• Core: STM8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 30
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWSTM8
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 22 Channel
• On-chip Dac: 12 bit, 1 Channel
• For Use With: 497-10594 - DEM FOR STM8L15X LOW PWR MODES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10515

Revision history
12
120/122
Revision history
Table 66.
10-Sep-2009
11-Dec-2009
06-Aug-2009
02-Apr-2010
Date
Document revision history
Revision
1
2
3
4
Initial release
Updated peripheral naming throughout document.
Added
Added capacitive sensing channels in
Updated PA7, PC0 and PC1 in
Changed CLK and REMAP register names in
Changed description of WDGHALT in
Added typical power consumption values in
Correct VIH max in
Added WLCSP28 package
Modified
Modified Low power run mode in
page 14
Added
Modified
at address 0x00 8008)
Modified OPT4 option bits in
page 56
Table 12: Option byte description on page
description (“disable” instead of “enable”) and OPT1 description
Added OPTBL option bytes
Modified
Changed title of the document (STM8L151x4, STM8L151x6,
STM8L152x4, STM8L152x6)
Changed pinout (V
V
Changed packages
Changed first page
Modified note 1 in
Added note to PA7, PC0, PC1 and PE0 in
description on page 27
Modified
Modified
package mechanical data on page 113
swapped)
Modified
package outline on page 113
Section : on page
EXTI_CONF replaced with EXTI_CONF1 in
register map on page 37
Updated
DDIO
Doc ID 15962 Rev 5
Figure 7: STM8L151Cx 48-pin pinout (without LCD) on page 25
Section 8: Unique ID on page 59
Table 10: Interrupt mapping on page 54
Figure 44: WLCSP28 – 28-pin wafer level chip scale package,
Figure 9: Memory map on page 35
Section 9: Electrical parameters on page 60
Figure 9: Memory map on page 35
Table 61: WLCSP28 – 28-pin wafer level chip scale package,
Section 9: Electrical parameters on page 60
Table 5: STM8L15x pin description on page 27
SS1
79: renamed Rm, Lm and Cm
Table 36
, V
DD1
, V
Table 11: Option byte addresses on
(A1 ball location)
Changes
Table 5: STM8L15x pin description
SS2
Section 3.1: Low power modes on
, V
DD 2
Table 12
Features on page 1
(min and max columns
STM8L151xx, STM8L152xx
instead of V
57: modified OPT0
Table 5: STM8L15x pin
Table 18
Table 8: General hardware
and added 2 notes.
Table 8
(added reserved area
to
SS
Table 26
, V
DD,
V
SSIO
,