MC9S12P32CFT Freescale Semiconductor, MC9S12P32CFT Datasheet - Page 502

• Manufacturer Part Number: MC9S12P32CFT
• Description: MCU 16BIT 32K FLASH 48-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12P32CFT

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 10x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN Exposed Pad
• Processor Series: S12P
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, DEMO9S12PFAME
• Package: 48QFN EP
• Family Name: HCS12
• Maximum Speed: 32 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Interface Type: CAN/SCI/SPI
• On-chip Adc: 10-chx12-bit
• Number Of Timers: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Electrical Characteristics
A.1.3
There are four groups of functional pins.
A.1.3.1
The I/O pins have a level in the range of 3.15V to 5.5V. This class of pins is comprised of all port I/O pins,
the analog inputs, BKGD and the RESET pins. Some functionality may be disabled.
A.1.3.2
This group is made up by the VRH and VRL pins.
A.1.3.3
The pins EXTAL, XTAL dedicated to the oscillator have a nominal 1.8V level.
A.1.3.4
This pin is used for production testing only. The TEST pin must be tied to ground in all applications.
A.1.4
Power supply must maintain regulation within operating V
operating maximum current conditions. If positive injection current (V
the injection current may flow out of V
regulation. Ensure external V
will be the greatest risk when the MCU is not consuming power; e.g., if no system clock is present, or if
clock rate is very low which would reduce overall power consumption.
A.1.5
Absolute maximum ratings are stress ratings only. A functional operation under or outside those maxima
is not guaranteed. Stress beyond those limits may affect the reliability or cause permanent damage of the
device.
This device contains circuitry protecting against damage due to high static voltage or electrical fields;
however, it is advised that normal precautions be taken to avoid application of any voltages higher than
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (e.g., either V
502
Pins
Current Injection
Absolute Maximum Ratings
I/O Pins
Analog Reference
Oscillator
TEST
In the following context V
VDDX; V
I
VDDR pins.
DD35
denotes the sum of the currents flowing into the VDDA, VDDX and
SS35
DD35
is used for either VSSA and VSSX unless otherwise noted.
S12P-Family Reference Manual, Rev. 1.13
load will shunt current greater than maximum injection current. This
DD35
DD35
and could result in external power supply going out of
is used for either VDDA, VDDR, and
NOTE
DD35
or V
SS35
DD
or V
in
range during instantaneous and
> V
DD35
DD35
).
) is greater than I
Freescale Semiconductor
DD35
,