HD6417020SVX12IV Renesas Electronics America, HD6417020SVX12IV Datasheet - Page 404

• Manufacturer Part Number: HD6417020SVX12IV
• Description: MCU 3/5V 0K PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7020r

Specifications of HD6417020SVX12IV

• Core Processor: SH-1
• Core Size: 32-Bit
• Speed: 12.5MHz
• Connectivity: EBI/EMI, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

1. Select the communication format in the serial mode register (SMR).
2. Write the value corresponding to the bit rate in the bit rate register (BRR) unless an external
3. Select the clock source in the serial control register (SCR). Leave RIE, TIE, TEIE, MPIE, TE
4. Wait for at least the interval required to transmit or receive one bit, then set TE or RE in the
Note:
clock is used.
and RE cleared to 0.
serial control register (SCR) to 1. Also set RIE, TIE, TEIE and MPIE. Setting the
corresponding bit of the pin function controller, TE and RE enables the SCI to use the TxD or
RxD pin.
High except in continuous transmitting or receiving.
Figure 13.16 Sample Flowchart for SCI Initialization
Select communication format in SMR
Clear TE and RE bits to 0 in SCR
Set RIE, TIE, TEIE, MPIE, CKE1,
(leaving TE and RE cleared to 0)
Set RIE, TIE, TEIE, and MPIE
Set TE or RE to 1 in SCR;
and CKE0 bits in SCR
1-bit interval elapsed?
Start of initialization
Set value in BRR
End
Yes
Wait
No
(1)
(2)
(3)
(4)
RENESAS 387