S912XEP100J5MAG Freescale Semiconductor, S912XEP100J5MAG Datasheet - Page 876

• Manufacturer Part Number: S912XEP100J5MAG
• Description: MCU 64K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S912XEP100J5MAG

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 24 128 KByte Flash Module (S12XFTM128K2V1)
24.4.2.9
The Erase P-Flash Sector operation will erase all addresses in a P-Flash sector.
Upon clearing CCIF to launch the Erase P-Flash Sector command, the Memory Controller will erase the
selected Flash sector and then verify that it is erased. The CCIF flag will be set after the Erase P-Flash
Sector operation has completed.
876
1. As defined by the memory map for FTM256K2.
2. As found in the memory map for FTM256K2.
1. As defined by the memory map for FTM256K2.
FERSTAT
FERSTAT
Register
Register
FSTAT
FSTAT
Erase P-Flash Sector Command
CCOBIX[2:0]
Table 24-49. Erase P-Flash Sector Command FCCOB Requirements
MGSTAT1
MGSTAT0
EPVIOLIF
MGSTAT1
MGSTAT0
EPVIOLIF
ACCERR
ACCERR
Error Bit
Error Bit
000
001
FPVIOL
FPVIOL
Table 24-50. Erase P-Flash Sector Command Error Handling
Table 24-48. Erase P-Flash Block Command Error Handling
MC9S12XE-Family Reference Manual , Rev. 1.23
Global address [15:0] anywhere within the sector to be erased.
Set if CCOBIX[2:0] != 001 at command launch
Set if command not available in current mode (see
Set if an invalid global address [22:16] is supplied
Set if an area of the selected P-Flash block is protected
Set if any errors have been encountered during the verify operation
Set if any non-correctable errors have been encountered during the verify
operation
None
Set if CCOBIX[2:0] != 001 at command launch
Set if command not available in current mode (see
Set if an invalid global address [22:16] is supplied
Set if a misaligned phrase address is supplied (global address [2:0] != 000)
Set if the selected P-Flash sector is protected
Set if any errors have been encountered during the verify operation
Set if any non-correctable errors have been encountered during the verify
operation
None
Refer to
2
0x0A
Section 24.1.2.1
FCCOB Parameters
Global address [22:16] to identify
for the P-Flash sector size.
Error Condition
Error Condition
P-Flash block to be erased
(1)
(1)
Table
Table
24-30)
24-30)
Freescale Semiconductor
(2)