M30620FCAFP#U5 Renesas Electronics America, M30620FCAFP#U5 Datasheet - Page 8

• Manufacturer Part Number: M30620FCAFP#U5
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30620FCAFP#U5

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: M16C
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 87
• Interface Type: SIM/UART
• On-chip Adc: 10-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

The figure of each register configuration describes its functions and attributes as follows :
*1
*2
*3
Blank:Set to "0" or "1" according to intended use
0:
1:
X:
R:
W:
Terms to use here are explained as follows.
• Nothing is assigned
• Must not be set
• Reserved bit
• Function varies with each operation mode
• Invalid in A mode
• Valid when bit A="0"
Nothing is assigned to the bit concerned. When write, set "0" for new function in
future plan.
Not select. The operation at having selected is not guaranteed.
Reserved bit. Set the specified value.
Bit function changes according to the mode of peripheral functions.
The bit concerned has no function in A mode. Set the specified value.
When bit A is "1", the bit concerned has no function. When bit A is "0", the bit
concerned has function.
XXX register
b7
Set to "0"
Set to "1"
Nothing is assigned
Read
O.....Possible to read
X.....Impossible to read
–.....Nothing is assigned
Write
O.....Possible to write
X.....Written value is invalid
–.....Nothing is assigned
b6
b5
b4
When write, value can be "0" or "1"
b3
0
b2
b1
b0
Bit symbol
Nothing is assigned.
In an attempt to write to this bit, write "0". The value, if read, turns out to be indeterminate.
XXX0
XXX1
XXX4
XXX5
XXX6
XXX7
Reserved bit
Symbol
XXX
XXX select bit
Function varies with each operation mode
XXX flag
Bit name
*1
Address
XXX
b1 b0
1 0 : XXX
0 1 : XXX
1 0 : Must not be set
1 1 : XXX
Must always be set to "0"
When reset
00
16
Function
R
W
*2
*3