DF2166VT33 Renesas Electronics America, DF2166VT33 Datasheet - Page 211

• Manufacturer Part Number: DF2166VT33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

7.6.4
Setting the CHNE bit in MRB to 1 enables a number of data transfers to be performed
consecutively in response to a single transfer request. SAR, DAR, CRA, CRB, MRA, and MRB,
which define data transfers, can be set independently.
Figure 7.8 shows the overview of chain transfer operation. When activated, the DTC reads the
register information start address stored at the DTC vector address, and then reads the first register
information at that start address. After the data transfer, the CHNE bit will be tested. When it has
been set to 1, DTC reads the next register information located in a consecutive area and performs
the data transfer. These sequences are repeated until the CHNE bit is cleared to 0.
In the case of transfer with the CHNE bit set to 1, an interrupt request to the CPU is not generated
at the end of the specified number of transfers or by setting of the DISEL bit to 1, and the interrupt
source flag for the activation source is not affected.
DTC vector
address
Chain Transfer
Register information
start address
Figure 7.8 Chain Transfer Operation
Register information
Register information
CHNE = 1
CHNE = 0
Rev. 3.00, 03/04, page 169 of 830
Destination
Destination
Source
Source