DF2166VT33 Renesas Electronics America, DF2166VT33 Datasheet - Page 422

• Manufacturer Part Number: DF2166VT33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

14.4
Figure 14.3 shows the general format for asynchronous serial communication. One frame consists
of a start bit (low level), followed by transmit/receive data, a parity bit, and finally stop bits (high
level). In asynchronous serial communication, the transmission line is usually held in the mark
state (high level). The SCI monitors the transmission line, and when it goes to the space state (low
level), recognizes a start bit and starts serial communication. Inside the SCI, the transmitter and
receiver are independent units, enabling full-duplex communication. Both the transmitter and the
receiver also have a double-buffered structure, so that data can be read or written during
transmission or reception, enabling continuous data transfer and reception.
Rev. 3.00, 03/04, page 380 of 830
Serial
data
Operation in Asynchronous Mode
1
Start
bit
1 bit
Figure 14.3 Data Format in Asynchronous Communication
0
LSB
D0
(Example with 8-Bit Data, Parity, Two Stop Bits)
One unit of transfer data (character or frame)
D1
D2
Transmit/receive data
D3
7 or 8 bits
D4
D5
D6
MSB
D7
Parity
bit
1 bit or
none
0/1
Stop bit
1
1 or 2 bits
1
(mark state)
Idle state
1