PIC16LF74T-I/ML Microchip Technology, PIC16LF74T-I/ML Datasheet - Page 94

• Manufacturer Part Number: PIC16LF74T-I/ML
• Description: IC MCU FLASH 4KX14 A/D 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16LF74T-I/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 192 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16F7X
TABLE 12-2:
DS30325B-page 92
Osc Type
Capacitor values are for design guidance only.
These capacitors were tested with the crystals listed
below for basic start-up and operation. These values
were not optimized.
Different capacitor values may be required to produce
acceptable oscillator operation. The user should test
the performance of the oscillator over the expected
V
See the notes following this table for additional
information.
200 kHz
20 MHz
DD
32 kHz
1 MHz
4 MHz
8 MHz
Note 1: Higher capacitance increases the stability
XT
HS
LP
and temperature range for the application.
2: Since each resonator/crystal has its own
3: Rs may be required in HS mode, as well
4: Always verify oscillator performance over
of oscillator, but also increases the start-
up time.
characteristics, the user should consult
the resonator/crystal manufacturer for
appropriate values of external compo-
nents.
as XT mode, to avoid overdriving crystals
with low drive level specification.
the V
expected for the application.
200 kHz
200 kHz
Crystal
20 MHz
32 kHz
1 MHz
4 MHz
4 MHz
8 MHz
Freq
CAPACITOR SELECTION FOR
CRYSTAL OSCILLATOR
(FOR DESIGN GUIDANCE
ONLY)
DD
EPSON CA-301 20.000M-C
Crystals Used:
EPSON CA-301 8.000M-C
Epson C-001R32.768K-A
STD XTL 200.000KHz
and temperature range that is
ECS ECS-10-13-1
ECS ECS-40-20-1
Typical Capacitor Values
33 pF
15 pF
56 pF
15 pF
15 pF
15 pF
15 pF
15 pF
C1
Tested:
33 pF
15 pF
15 pF
15 pF
15 pF
15 pF
56 pF
15 pF
C2
12.2.3
For timing insensitive applications, the “RC” device
option offers additional cost savings. The RC oscillator
frequency is a function of the supply voltage, the resis-
tor (R
ing temperature. In addition to this, the oscillator
frequency will vary from unit to unit due to normal pro-
cess parameter variation. Furthermore, the difference
in lead frame capacitance between package types will
also affect the oscillation frequency, especially for low
C
variation due to tolerance of external R and C compo-
nents used. Figure 12-3 shows how the R/C combina-
tion is connected to the PIC16F7X.
FIGURE 12-3:
Recommended values:
EXT
C
V
R
EXT
SS
EXT
EXT
values. The user also needs to take into account
V
DD
) and capacitor (C
RC OSCILLATOR
F
OSC
/4
RC OSCILLATOR MODE
OSC1
OSC2/CLKOUT
 2002 Microchip Technology Inc.
EXT
3 k Ω ≤ R
C
EXT
) values, and the operat-
> 20pF
EXT
≤ 100 k Ω
PIC16F7X
Internal
Clock