MC68332ACFC25 Freescale Semiconductor, MC68332ACFC25 Datasheet - Page 233

• Manufacturer Part Number: MC68332ACFC25
• Description: IC MCU 32BIT 25MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: M683xxr

Specifications of MC68332ACFC25

• Core Processor: CPU32
• Core Size: 32-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Type: ROMless
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

FRZ[1:0] — Freeze Control
SUPV — Supervisor/Unrestricted
IARB — Interrupt Arbitration
D.4.2 QTEST — QSM Test Register
D.4.3 QILR — QSM Interrupt Level Register
ILQSPI — Interrupt Level for QSPI
ILSCI — Interrupt Level for SCI
MC68332
USER’S MANUAL
15
0
0
reset. The SCI receiver and transmitter must be disabled before STOP is set. To stop
the QSPI, set the HALT bit in SPCR3, wait until the HALTA flag is set, then set STOP.
FRZ1 determines what action is taken by the QSPI when the FREEZE signal of the
IMB is asserted. FREEZE is asserted whenever the CPU enters background mode.
FRZ0 is reserved for future use.
Each module that generates interrupts must have an IARB value. IARB values are
used to arbitrate between interrupt requests of the same priority.
Used for factory test only.
The values of the ILQSPI and ILSCI fields in QILR determine the priority of QSPI and
SCI interrupt requests. QIVR determines the value of the interrupt vector number the
QSM supplies when it responds to an interrupt acknowledge cycle. At reset, QIVR is
initialized to vector number $0F, the uninitialized interrupt vector number. To use in-
terrupt-driven serial communication, a user-defined vector number must be written to
QIVR.
When an interrupt request is made, ILQSPI value determines which of the interrupt re-
quest signals is asserted; when a request is acknowledged, the QSM compares this
value to a mask value supplied by the CPU32 to determine whether to respond. ILQS-
PI must have a value in the range $0 (lowest priority) to $7 (highest priority).
When an interrupt request is made, ILSCI value determines which of the interrupt re-
quest signals is asserted. When a request is acknowledged, the QSM compares this
value to a mask value supplied by the CPU32 to determine whether to respond. The
field must have a value in the range $0 (lowest priority) to $7 (highest priority).
If ILQSPI and ILSCI have the same nonzero value, and both submodules simulta-
neously request interrupt service, the QSPI has priority.
RESET:
0 = Ignore the FREEZE signal on the IMB
1 = Halt the QSPI (on a transfer boundary)
0 = Supervisor access
1 = User access
QIVR — QSM Interrupt Vector Register
14
0
0
13
0
ILQSPI
0
Freescale Semiconductor, Inc.
11
For More Information On This Product,
0
10
0
Go to: www.freescale.com
REGISTER SUMMARY
ILSCI
0
8
0
7
0
0
0
0
INTV
1
1
$YFFC02
$YFFC04
$YFFC05
1
D-19
0
1