LM317LZ STMicroelectronics, LM317LZ Datasheet - Page 9

• Manufacturer Part Number: LM317LZ
• Description: IC REG 1.2V-37V ADJ TO-92
• Manufacturer: STMicroelectronics
• Type: Voltage Regulatorr

Specifications of LM317LZ

• Regulator Topology: Positive Adjustable
• Voltage - Output: 1.2 ~ 37 V
• Number Of Regulators: 1
• Current - Output: 100mA
• Current - Limit (min): 100mA
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-92-3 (Standard Body), TO-226
• Voltage Regulator Type: Linear
• Topology: Standard
• Regulator Output Type: Adjustable
• Polarity Type: Positive
• Number Of Outputs: Single
• Output Voltage: 1.2 to 37V
• Package Type: TO-92
• Output Current: 0.2(Typ)A
• Load Regulation: 0.5%
• Line Regulation: 0.04%/V
• Operating Temp Range: 0C to 125C
• Operating Temperature Classification: Commercial
• Pin Count: 3
• Mounting: Through Hole
• Polarity: Positive
• Output Type: Adjustable
• Input Voltage Max: 5 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: 0 C
• Mounting Style: Through Hole
• Reference Voltage: 1.3 V
• Current, Output: 200 mA
• Current, Supply: 50 μA
• Regulation, Line: 0.02 %/V
• Regulation, Load: 20 mV
• Regulator Type: Positive Voltage Out
• Temperature, Operating, Range: 0 to +125 °C
• Voltage, Noise: 0.003 %
• Voltage, Output: 37 V
• Voltage, Supply, Rejection Ratio: 80 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Input: -
• Voltage - Dropout (typical): -
• Lead Free Status / Rohs Status: Compliant
• Other names: 497-1573-5; 497-2975-5; 497-2975-5

LM217L/LM317L
Application information
6
Application information
The LM317L provides an internal reference voltage of 1.25V between the output and
adjustments terminals. This is used to set a constant current flow across an external resistor
divider (see
Figure
4.), giving an output voltage V
of:
O
V
= V
(1 + R
/R
) + I
R
O
REF
2
1
ADJ
2
The device was designed to minimize the term I
(100µA max) and to maintain it very
ADJ
constant with line and load changes. Usually, the error term I
× R
can be neglected. To
ADJ
2
obtain the previous requirement, all the regulator quiescent current is returned to the output
terminal, imposing a minimum load current condition. If the load is insufficient, the output
voltage will rise.
Since the LM317L is a floating regulator and "sees" only the input-to-output differential
voltage, supplies of very high voltage with respect to ground can be regulated as long as the
maximum input-to-output differential is not exceeded. Furthermore, programmable regulator
are easily obtainable and, by connecting a fixed resistor between the adjustment and output,
the device can be used as a precision current regulator. In order to optimize the load
regulation, the current set resistor R
(see
Figure
4.) should be tied as close as possible to
1
the regulator, while the ground terminal of R
should be near the ground of the load to
2
provide remote ground sensing.
9/18