STMPE16M31PXQTR STMicroelectronics, STMPE16M31PXQTR Datasheet - Page 26

• Manufacturer Part Number: STMPE16M31PXQTR
• Description: IC CTLR TOUCHKEY 16CHAN 32-QFN
• Manufacturer: STMicroelectronics
• Series: S-Touch™r
• Type: Capacitive, PWM, Ratio Enginer

Specifications of STMPE16M31PXQTR

• Featured Product: STMPE16M31PX
• Number Of Inputs/keys: 16 Key, Slider
• Data Interface: I²C
• Data Rate/sampling Rate (sps, Bps): 100k, 400k
• Voltage Reference: External
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN Exposed Pad
• Supply Voltage: 1.65 V to 1.95 V
• Number Of Channels: 16
• Dimensions: 4 mm L x 4 mm W x 0.8 mm H
• Temperature Range: - 40 C to + 85 C
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Resolution (bits): -
• Touch Panel Interface: -
• Other names: 497-10738-2

System controller
INT_STA
Address:
Type:
Reset:
Description:
26/75
GPIO
RW
7
0
[7] GPIO: Activity in GPIO
[6] PWM: Any channel of PWM has completed the programmed sequence
[5] Device wake up from SLEEP or HIBERNATE mode
[4] ENV: Possible drastic/abnormal environmental changes that requires attention from system
[3] EOC: End of calibration
[2] TOUCH: Touch-key event
[1] PROX: Proximity sensor event
[0] RESERVED
PWM
RW
6
0
Read ‘1’ if GPIO event occurs
Write ‘1’ to clear the interrupt status
Read ‘1’ if PWM event occurs
Write ‘1’ to clear the interrupt status
Read ‘1’ if wake-up event occurs
Write ‘1’ to clear the interrupt status
software. This event includes ‘calibration stuck’ and ‘tuning out of range’. If this bit is set, it is
recommended that the host software initiates an unconditional calibration.
Read ‘1’ if the events occur
Write ‘1’ to clear the interrupt status
Read ‘1’ if the host-triggered calibration has completed
Write ‘1’ to clear the interrupt status
Read ‘1’ if touch is detected
Write ‘1’ to clear the interrupt status
Read ‘1’ if proximity sensor detects an object
Write ‘1’ to clear the interrupt status
0x08
R/W
0x00
This register holds interrupt status from each event.
WAKEUP
RW
5
0
Doc ID 17058 Rev 2
ENV
RW
4
0
EOC
RW
3
0
TOUCH
RW
2
0
Interrupt status register
PROX
RW
1
0
STMPE16M31PX
RESERVED
0
0
-