78M6612-IGTR/F Maxim Integrated Products, 78M6612-IGTR/F Datasheet - Page 22
![no-image](/images/manufacturer_photos/0/4/417/maxim_integrated_products_sml.jpg)
78M6612-IGTR/F
Manufacturer Part Number
78M6612-IGTR/F
Description
IC POWER MEASUREMENT AC 64-LQFP
Manufacturer
Maxim Integrated Products
Datasheet
1.78M6612-IMF.pdf
(111 pages)
Specifications of 78M6612-IGTR/F
Mounting Style
SMD/SMT
Package / Case
LQFP-64
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
78M6612-IGTR/F
Manufacturer:
Maxim Integrated
Quantity:
10 000
78M6612 Data Sheet
Port Registers: The I/O ports are controlled by Special Function Registers P0, P1, and P2. The contents
of the SFR can be observed on corresponding pins on the chip. Writing a ‘1’ to any of the ports (see
Table
corresponding pin to be held at low level (GND). The data direction registers DIR0, DIR1, and DIR2
define individual pins as input or output pins (see the
All DIO ports on the chip are bi-directional. Each consists of a Latch (SFR P0 to P2), an output driver,
and an input buffer, therefore the MPU can output or read data through any of these ports. Even if a DIO
pin is configured as an output, the state of the pin can still be read by the MPU, for example when
counting pulses issued via DIO pins that are under CE control.
1.4.4 Special Function Registers Specific to the 78M6612
Table 10
22
Register
P0
DIR0
P1
DIR1
P2
DIR2
Register
ERASE
FPAG
9) causes the corresponding pin to be at high level (V3P3), and writing a ‘0’ causes the
The technique of reading the status of or generating interrupts based on DIO pins configured as
outputs, can be used to implement pulse counting.
shows the location and description of the 78M6612-specific SFRs.
FLSH_ERASE
FLSH_PGADR
Alternative
Address
0xA2
0xA0
0xA1
0x80
0x90
0x91
SFR
Name
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Address
0xB7
0x94
SFR
Table 10: Special Function Registers
Description
Register for port 0 read and write operations (pins DIO4…DIO7).
Data direction register for port 0. Setting a bit to 1 means that the
corresponding pin is an output.
Register for port 1 read and write operations (pins DIO8…DIO11,
DIO14-DIO15).
Data direction register for port 1.
Register for port 2 read and write operations (pins DIO16…DIO17,
DIO19…DIO21).
Data direction register for port 2.
Table 9: Port Registers
R/W
R/W
W
This register is used to initiate either the Flash Mass
Erase cycle or the Flash Page Erase cycle. Specific
patterns are expected for FLSH_ERASE in order to initiate
the appropriate Erase cycle (default = 0x00).
0x55 – Initiate Flash Page Erase cycle. Must be
0xAA – Initiate Flash Mass Erase cycle. Must be
Any other pattern written to FLSH_ERASE will have no
effect.
Flash Page Erase Address register containing the Flash
memory page address (page 0 through 127) that will be
erased during the Page Erase cycle (default = 0x00).
Section 1.5.7 Digital I/O
preceded by a write to FLSH_PGADR @ SFR
0xB7.
preceded by a write to FLSH_MEEN @ SFR
0xB2 and the debug port must be enabled.
Description
for details).
DS_6612_001
Rev. 1.2