XBIB-U Digi International/Maxstream, XBIB-U Datasheet - Page 58

• Manufacturer Part Number: XBIB-U
• Description: BOARD USB ZIGBEE MOD PRO
• Manufacturer: Digi International/Maxstream

Specifications of XBIB-U

• Design Resources: XBIB-U Shematic
• Accessory Type: Interface Board
• For Use With/related Products: XBee and XBee Pro Radios
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XBee/XBee‐PRO™ OEM RF Modules ‐ 802.15.4 ‐ v1.xAx [2007.05.031]
MSB (most significant byte) first,
LSB (least significant) last
MSB (most significant byte) first,
LSB (least significant) last
Source Address (Bytes 5-12)
Source Address (Bytes 5-6)
Start Delimiter
Start Delimiter
TX (Transmit) Status
RX (Receive) Packet: 64-bit Address
RX (Receive) Packet: 16-bit Address
0x7E
0x7E
API Identifier Value: 0x89
When a TX Request is completed, the module sends a TX Status message. This message will indi-
cate if the packet was transmitted successfully or if there was a failure.
Figure 3‐12. TX Status Frames
NOTES:
API Identifier Value: 0x80
When the module receives an RF packet, it is sent out the UART using this message type.
Figure 3‐13. RX Packet (64‐bit address) Frames
API Identifier Value: 0x81
When the module receives an RF packet, it is sent out the UART using this message type.
Figure 3‐14. RX Packet (16‐bit address) Frames
© 2007 MaxStream, Inc.
• “STATUS = 1” occurs when all retries are expired and no ACK is received.
• If transmitter broadcasts (destination address = 0x000000000000FFFF), only
• “STATUS = 3” occurs when Coordinator times out of an indirect transmission.
“STATUS = 0 or 2” will be returned.
Timeout is defined as (2.5 x SP (Cyclic Sleep Period) parameter value).
MSB
MSB
Received Signal Strength Indicator -
Hexadecimal equivalent of (-dBm) value.
(For example: If RX signal strength = -40
dBm, “0x28” (40 decimal) is returned)
Received Signal Strength Indicator -
Hexadecimal equivalent of (-dBm) value.
(For example: If RX signal strength = -40
dBm, “0x28” (40 decimal) is returned)
Length
Length
Start Delimiter
LSB
0x7E
LSB
API Identifier
API Identifier
Identifies UART data frame being reported.
Note: If Frame ID = 0 in the TX Request, no
AT Command Response will be given.
0x81
0x80
RSSI (Byte 13)
RSSI (Byte 7)
API-specific Structure
API-specific Structure
MSB
Frame Data
Frame Data
Length
Frame ID (Byte 5)
Identifier-specific Data
Identifier-specific Data
LSB
cmdData
API Identifier
cmdData
0x89
API-specific Structure
Checksum
Checksum
1 Byte
1 Byte
Frame Data
bit 0 [reserved]
bit 1 = Address broadcast
bit 2 = PAN broadcast
bits 3-7 [reserved]
bit 0 [reserved]
bit 1 = Address broadcast
bit 2 = PAN broadcast
bits 3-7 [reserved]
Identifier-specific Data
Options (Byte 14)
Options (Byte 8)
cmdData
0 = Success
1 = No ACK (Acknowledgement) received
2 = CCA failure
3 = Purged
Checksum
1 Byte
Chapter 3 ‐ RF Module Configuration
Status (Byte 6)
Up to 100 Bytes per packet
Up to 100 Bytes per packet
RF Data (Byte(s) 15-n)
RF Data (Byte(s) 9-n)
58