TEA6845H/V2,518 NXP Semiconductors, TEA6845H/V2,518 Datasheet - Page 10

• Manufacturer Part Number: TEA6845H/V2,518
• Description: IC CAR RADIO TUNER 64-QFP
• Manufacturer: NXP Semiconductors

Specifications of TEA6845H/V2,518

• Frequency: AM, FM, WB
• Modulation Or Protocol: AM, FM
• Applications: AM/FM Radio Receiver
• Current - Receiving: 78mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 7.8 V ~ 9.2 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Sensitivity: -
• Memory Size: -
• Data Rate - Maximum: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935262638518; TEA6845H/V2-T; TEA6845H/V2-T

Philips Semiconductors
7.3.5
The detection point for the AM noise blanker is the output
stage of AM mixer 1, while blanking is realized at the
output of the mixer 2.
Trigger sensitivity can be modified by changing the resistor
value at pin AMNBHOLD.
7.3.6
FM and AM level detectors provide the temperature
compensated output voltage. The starting points and
slopes of the level detector outputs are programmable via
the I
7.4
The test mode of the IC is activated by:
8
In accordance with the Absolute Maximum Rating System (IEC 60134).
Notes
1. To avoid damage and wrong operation it is necessary to keep all 8.5 V supply voltages at a higher level than any 5 V
2. Machine model (R = 0 , C = 200 pF).
3. Human body model (R = 1.5 k , C = 100 pF).
2003 Feb 04
V
V
V
V
V
V
V
T
T
V
SYMBOL
V
stg
amb
Sending the test byte (byte 5) to the IC
Connecting pin FREF through a 100 k resistor to
V
Applying 50 A to pin FREF.
DDA1
DDA2
DDA3
DDA4
DDA5
DDA6
DDD
es
New In Car Entertainment (NICE) car radio
DDA1
DD8.5-DD5
supply voltage. This is also necessary during power-on and power-down sequences. Precautions have to be
provided in such a way that interference cannot pull the 8.5 V supply down below the 5 V supply.
LIMITING VALUES
2
C-bus.
Test mode
AM
FM
AND
NOISE DETECTOR AND BLANKER
analog supply voltage 1 for on-chip power supply
analog supply voltage 2 for on-chip power supply
analog supply voltage 3 for VCO
analog supply voltage 4 for tuning PLL
analog supply voltage 5 for FM and AM RF
analog supply voltage 6 for IF amplifier 1 and 2
digital supply voltage
difference between any 8.5 V supply voltage and any
5 V supply voltage
storage temperature
ambient temperature
electrostatic handling voltage
AM
LEVEL DETECTOR
PARAMETER
10
If the test mode is enabled by pin FREF:
The settling time of the AM IF2 AGC is reduced to less
than 100 ms in the nominal application
The digital-to-analog converters for the antenna DAA
and the level DAA can be clocked directly by the SCL
line of the I
The output at pin FREF can be selected by the I
TEA6880H or TEF6890H reference frequency, PLL
reference frequency or PLL programmable divider
output frequency
The RDS update control circuit can be clocked directly
via pin DAATD
Pin T1AMAGC can be used to enable the load PLL
circuit of the RDS update control circuit
Charge pumps can be set into 3-state mode.
note 1
note 2
note 3
CONDITIONS
2
C-bus
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
55
40
200
2000
MIN.
+10
+6.5
+10
+10
+10
+10
+6.5
+150
+85
+200
+2000
Product specification
MAX.
TEA6845H
V
V
V
V
V
V
V
V
V
V
C
C
2
UNIT
C-bus: