AT86RF230-ZUR Atmel, AT86RF230-ZUR Datasheet - Page 39

• Manufacturer Part Number: AT86RF230-ZUR
• Description: TXRX LOW POWER 2.4GHZ 32VQFN
• Manufacturer: Atmel

Specifications of AT86RF230-ZUR

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
• Applications: Industrial Monitoring and Control, Wireless Alarm and Security Systems
• Power - Output: -17dBm ~ 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 15.5mA
• Current - Transmitting: 16.5mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2405 MHz to 2480 MHz
• Interface Type: SPI
• Noise Figure: 6 dB
• Output Power: 20 dB
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 16.5 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (typ): 3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Data Rate - Maximum: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5131E-MCU Wireless-02/09
Bit
0x02
Read/Write
Reset value
Bit
0x02
Read/Write
Reset value
• Bit 6 – CCA_STATUS
Refer to section 8.6.
• Bit 5 – Reserved
• Bit [4:0] – TRX_STATUS
The register bits TRX_STATUS signal the current radio transceiver status. If the
requested state transition is not completed yet, the TRX_STATUS returns
STATE_TRANSITION_IN_PROGRESS. State transition timings are defined in Table
7-1.
Table 7-7. Radio Transceiver Status, Register Bits TRX_STATUS
Register 0x02 (TRX_STATE)
The register TRX_STATE controls the radio transceiver states via register bits
TRX_CMD. The status and the result of a TX_ARET/RX_AACK transaction is indicated
by register bits TRAC_STATUS.
A successful state transition shall be confirmed by reading register bits TRX_STATUS
in register 0x01 (TRX_STATUS).
Register Bits
TRX_STATUS
R/W
R
7
0
3
0
Value[4:0]
0x1C
0x1D
0x1E
0x00
0x01
0x02
0x06
0x08
0x09
0x0F
0x11
0x12
0x16
0x19
0x1F
TRAC_STATUS
R/W
R
6
0
2
0
State Description
P_ON
BUSY_RX
BUSY_TX
RX_ON
TRX_OFF (Clock State)
PLL_ON (TX_ON)
SLEEP
BUSY_RX_AACK
BUSY_TX_ARET
RX_AACK_ON
TX_ARET_ON
RX_ON_NOCLK
RX_AACK_ON_NOCLK
BUSY_RX_AACK_NOCLK
STATE_TRANSITION_IN_PROGRESS
All other values are reserved
TRX_CMD
R/W
R
5
0
1
0
TRX_CMD
R/W
R/W
AT86RF230
4
0
0
0
TRX_STATE
TRX_STATE
39