UGWP2USHN33 Unigen Corp, UGWP2USHN33 Datasheet - Page 10

• Manufacturer Part Number: UGWP2USHN33
• Description: MODULE JUNO-LPA-J 6935 MINI-COAX
• Manufacturer: Unigen Corp

Specifications of UGWP2USHN33

• Frequency: 2.4GHz ~ 2.48GHz
• Data Rate - Maximum: 62.5kbps
• Modulation Or Protocol: DSSS
• Power - Output: 200mW
• Sensitivity: -95dBm
• Voltage - Supply: 2.7 V ~ 3.6 V
• Current - Receiving: 60mA
• Current - Transmitting: 140mA
• Data Interface: Connector, Mirrored 2 x 6 Header
• Antenna Connector: Coaxial
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -
• Other names: 784-1009

Solutions for a Real Time World
Physical Implementation
The physical implementation of the RF transmission line must conform to the following
guidelines:
Emissions Compliance Testing
Notwithstanding the Modular Approval for the Radio Device with associated interconnect and
antennae, the end product configuration must meet digital emissions compliance and must be
tested in accordance with Industry Canada RSS-210 (Low Power License-Exempt Radio
communication Devices) requirements confirming radiated emissions are within specified
limits.
Applicable sections include:
These emissions tests can be conducted by the manufacturer or by contacting an approved
test facility equipped and certified accordingly. The results of these emissions tests are not
required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
Note:
Industry Canada generally follows the guidelines of the FCC for emissions level requirements.
FCC end-product compliance certification results may be used to satisfy Industry Canada
requirements. Please consult the Industry Canada, RSS 210 specifications to confirm inter-
agency compliance. If comparable FCC testing has not been performed or if the specifications
are not cross compliant, RSS 210 testing will be required.
Product Labeling Requirements
Industry Canada product labeling requirements stipulate specific text be placed on the device
containing the UGWR2US module.
located on the exterior of the OEM’s product. This same information must be included in the
product user manual.
UM-UGWR2US
[e-mail]
http://www.unigen.com
• Coaxial Cable: A coaxial of varying length may be used providing the impedance
• Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits
measures 50 +/- 2 ohms and is non-radiating. Best practice RF engineering suggests
the cable should be kept to the minimum length required to satisfy the application.
Excessive cable and interconnect loss may adversely effect the effective transmission
and reception range of the end product.
“This product contains Unigen WirelessUSB module
Canadian Cert No IC: 5125A-UGWR2US”
The product must include the following text and must be
Copyright Unigen Corporation, 2004
WirelessUSB™ - UGWR2US
10
45388 Warm Springs Blvd. Fremont, CA 94539
TEL: [phone] FAX: [phone]
Toll Free: [phone]
User Manual