UGWP2USHN33 Unigen Corp, UGWP2USHN33 Datasheet - Page 7

• Manufacturer Part Number: UGWP2USHN33
• Description: MODULE JUNO-LPA-J 6935 MINI-COAX
• Manufacturer: Unigen Corp

Specifications of UGWP2USHN33

• Frequency: 2.4GHz ~ 2.48GHz
• Data Rate - Maximum: 62.5kbps
• Modulation Or Protocol: DSSS
• Power - Output: 200mW
• Sensitivity: -95dBm
• Voltage - Supply: 2.7 V ~ 3.6 V
• Current - Receiving: 60mA
• Current - Transmitting: 140mA
• Data Interface: Connector, Mirrored 2 x 6 Header
• Antenna Connector: Coaxial
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -
• Other names: 784-1009

Solutions for a Real Time World
VSWR no greater than 2.0 and having a maximum output no greater than +2dBi The
transmission line must be designed to be 50-Ohm impedance.
Physical Implementation
The physical implementation of the RF transmission line must conform to the following
guidelines:
Emissions Compliance Testing
Notwithstanding the Modular Approval for the Radio Device with associated interconnect and
antennae, the end product configuration must meet digital emissions compliance and must be
tested in accordance with FCC Part 15 requirements confirming radiated emissions are within
specified limits.
Applicable sections include:
These emissions tests can be conducted by the manufacturer or by contacting an approved
test facility equipped and certified accordingly. The results of these emissions tests are not
required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
Co-location of Additional Transmitters
Digital Electronic Devices manufacturers using this MA grant should refer to Appendix B (FCC
Grant #) for end-products using two or more co-located RF transmitters. This grant states:
This modular approval is granted provided Digital Electronic Devices manufacturers assume
responsibility for ensuring that other transmitters operating in conjunction with the UGWR2US
comply with RF exposure requirements associated with their use. The use of one or more
UM-UGWR2US
[e-mail]
http://www.unigen.com
• Coaxial Cable: A coaxial of varying length may be used providing the impedance
• Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits
measures 50 +/- 2 ohms and is non-radiating. Best practice RF engineering suggests
the cable should be kept to the minimum length required to satisfy the application.
Excessive cable and interconnect loss may adversely effect the effective transmission
and reception range of the end product.
“This modular transmitter is approved for use in Digital Electronic Devices and
may operate in conjunction with other mobile and portable transmitters in the
same device; provided, the other mobile and portable transmitters have
satisfied the appropriate RF exposure requirements contained in the FCC
rules. The grantee must also provide Digital Electronic Device integrators, or
end users if marketed directly to end users, with installation and operating
instructions for satisfying RF exposure requirements. The Grantee must
inform second manufacturers/installers that in order for this module to be
operated in any configuration other than that permitted in the preceding
sentences, a separate FCC equipment authorization must be obtained for
each device into which this module is installed.“
Copyright Unigen Corporation, 2004
WirelessUSB™ - UGWR2US
7
45388 Warm Springs Blvd. Fremont, CA 94539
TEL: [phone] FAX: [phone]
Toll Free: [phone]
User Manual