UGWP2USHN33 Unigen Corp, UGWP2USHN33 Datasheet - Page 12

• Manufacturer Part Number: UGWP2USHN33
• Description: MODULE JUNO-LPA-J 6935 MINI-COAX
• Manufacturer: Unigen Corp

Specifications of UGWP2USHN33

• Frequency: 2.4GHz ~ 2.48GHz
• Data Rate - Maximum: 62.5kbps
• Modulation Or Protocol: DSSS
• Power - Output: 200mW
• Sensitivity: -95dBm
• Voltage - Supply: 2.7 V ~ 3.6 V
• Current - Receiving: 60mA
• Current - Transmitting: 140mA
• Data Interface: Connector, Mirrored 2 x 6 Header
• Antenna Connector: Coaxial
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -
• Other names: 784-1009

Solutions for a Real Time World
may not be modified or altered in any way from the original design as represented in the
antenna datasheets as supplied by the manufacturer.
The antennas selected have been specifically tested with the UGWR2US, and they are certified
through the regulatory agencies in the US, Canada, and European Union for authorized use.
Use of antennas in a platform other than the antennas selected by Unigen voids the MA grant
for that platform.
Antenna Interconnect & Impedance
Unigen has pre-qualified antennas that integrate the connectors, transmission line and the
antenna. Unigen’s UGWR2US requires the use of a ½ dipole, 2.4~2.5GHz frequency range,
with a VSWR no greater than 2.0 and having a maximum output no greater than +2dBi The
transmission line must be designed to be 50-Ohm impedance. Physical Implementation
The physical implementation of the RF transmission line must conform to the following
guidelines:
Emissions Compliance Testing
The end-product configuration must meet digital emissions compliance and must be tested in
accordance with the European Union standards ETSI 300 328 (European Telecommunications
Standard for 2.4 GHz ISM band Emissions) and ETSI 300 826 (Electromagnetic Compatibility).
Detailed European Union documents may be obtained from the web location:
http://europa.eu.int/comm/enterprise/rtte/infor.htm
These emissions tests can be conducted by the manufacturer or by contacting an approved
test facility equipped and certified accordingly. The results of these emissions tests are not
required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
Note:
The European Union generally follows the guidelines of the FCC for emissions level
requirements. FCC end-product compliance certification results, if available, may be used to
satisfy EU requirements (Substitution Method). Please consult the ETSI 300 328 specifications
to confirm inter-agency compliance. If comparable FCC testing has not been performed or if
the specifications are not cross compliant, ETSI 300 328 testing will be required. Additionally,
testing to the ETSI 301 489-17 (immunity testing) is strongly recommended. Unigen assumes
no responsibility for compliance of the end-product configuration.
UM-UGWR2US
[e-mail]
http://www.unigen.com
• Coaxial Cable: A coaxial of varying length may be used providing the impedance
measures 50 +/- 2 ohms and is non-radiating. Best practice RF engineering suggests
the cable should be kept to the minimum length required to satisfy the application.
Excessive cable and interconnect loss may adversely effect the effective transmission
and reception range of the end product.
Copyright Unigen Corporation, 2004
WirelessUSB™ - UGWR2US
12
45388 Warm Springs Blvd. Fremont, CA 94539
TEL: [phone] FAX: [phone]
Toll Free: [phone]
User Manual