DEMOKITLR STMicroelectronics, DEMOKITLR Datasheet - Page 5

• Manufacturer Part Number: DEMOKITLR
• Description: DEMO KIT LONG-RANGE
• Manufacturer: STMicroelectronics
• Type: Development kitr

Specifications of DEMOKITLR

• Contents: Reader, Antenna, Cables, CD, Documentation, Power Supply, Samples
• For Use With/related Products: LRI512
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5538; DEMOKITLRI512

READER FIRMWARE UPGRADE
The FEIG MR100 reader firmware needs, first, to be upgraded, for it to work with LRI64 contactless mem-
ory devices. To download the “ABDG30100-mr100-a.mhx” firmware code into the MR100 reader flash
memory, follow the steps described in the “N10301-0e-ID-A.pdf” guide. When this new firmware is correct-
ly installed, follow the actions listed, below, to install all the new software tools:
1. Remove all existing FEIG tools (IC_START, STM demokit, ...) from the computer.
2. Install the “Feig IC_START 6.0” software which supports the LRI512 and LRI64 tags in Inventory Read
3. Launch the IC_Start software. Go to the configuration mode, and set the ISO15693 protocol to:
This is illustrated in
Install the STM demokit software that is found in the “DemoKitLR_V30.zip” file.
Figure 3. FEIG IC_Start Software in Configuration Mode
and Write
–
–
–
–
10% ASK modulation
1/4 transmission data coding
ASK demodulation
Fast data rate on reception
Figure
3.. Store this setting by pressing the save button.
UM0073 - USER MANUAL
5/15