DAC1405D750HW/C1,551 NXP Semiconductors, DAC1405D750HW/C1,551 Datasheet - Page 41

• Manufacturer Part Number: DAC1405D750HW/C1,551
• Description: DAC (D/A Converters) Dual 14BtDAC 750Msps 4xand 8xnterpolating
• Manufacturer: NXP Semiconductors

Specifications of DAC1405D750HW/C1,551

• Number Of Dac Outputs: 4
• Conversion Rate: 650 MSPS
• Resolution: 14 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Power Dissipation: 0.53 W
• Minimum Operating Temperature: - 40 C
• Supply Current: 5 mA
• Number Of Converters: 2
• Settling Time: 20 ns
• Package / Case: HTQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935290796551

NXP Semiconductors
13. Glossary
DAC1405D650
Product data sheet
Spurious-Free Dynamic Range (SFDR): — The ratio between the RMS value of the
reconstructed output sine wave and the RMS value of the largest spurious observed
(harmonic and non-harmonic, excluding DC component) in the frequency domain.
Intermodulation Distortion (IMD): — From a dual-tone digital input sine wave (these
two frequencies being close together), the intermodulation distortion products IMD2 and
IMD3 (respectively, second and third-order components) are defined below.
IMD2 — The ratio of the RMS value of either tone to the RMS value of the worst second
order intermodulation product.
IMD3 — The ratio of the RMS value of either tone to the RMS value of the worst third
order intermodulation product.
Restricted Bandwidth Spurious Free Dynamic Range — The ratio of the RMS value of
the reconstructed output sine wave to the RMS value of the noise, including the
harmonics, in a given bandwidth centered around f
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 10 September 2010
Dual 14-bit DAC, up to 650 Msps; 2×, 4× and 8× interpolating
offset
.
DAC1405D650
© NXP B.V. 2010. All rights reserved.
41 of 45