A-12W-K Fujitsu, A-12W-K Datasheet - Page 2

• Manufacturer Part Number: A-12W-K
• Description: Low Signal Relays - PCB Mini Signal 12VDC
• Manufacturer: Fujitsu

Specifications of A-12W-K

• Contact Form: 2 Form C (DPDT)
• Coil Voltage: 12 VDC
• Coil Type: Non-Latching
• Power Consumption: 140 mW
• Termination Style: PCB Pins
• Maximum Switching Current: 2 A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

*
1
Contact
Coil
Time Value
Insulation
Life
Other
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
SPECIFICATIONS
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
Arrangement
Material
Resistance (initial)
Rating (resistive)
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Minimum Switching Load*
Capacitance
Nominal Power (at 20 C)
Operate Power (at 20 C)
Operating Temperature
Operate (at nominal voltage)
Release (at nominal voltage)
Resistance (at 500 VDC)
Dielectric
Strength
Surge Strength
Mechanical
Electrical
Vibration
Resistance Endurance
Shock
Resistance Endurance
Weight
Item
between open contacts
between adjacent contacts
between coil and contacts
Misoperation
Misoperation
1
2 form C (DPDT)
Gold overlay silver alloy
Maximum 50 m
0.5 A 125 VAC or 1 A 30 VDC
2 A
62.5 AV/30 W
250 VAC, 220 VDC
2 A
0.01 mA 10 mVDC
Approximately 0.5 pF (between open contacts, adjacent contacts)
Approximately 1.0 pF (between coil and contacts)
0.14 to 0.3 W
0.08 to 0.17 W
–40 C to +85 C (no frost) (refer to the CHARACTERISTIC DATA)
Maximum 6 ms
Maximum 4 ms
Minimum 1,000 M
1,000 VAC 1 minute
1,000 VAC 1 minute
1,000 VAC 1 minute
1,500 V (between coil and contacts)
1
2
10 to 55 Hz (double amplitude of 3.3 mm)
10 to 55 Hz (double amplitude of 5.0 mm)
500 m/s
1,000 m/s
Approximately 1.2 g
Standard Type
10
10
A-( ) W-K
8
5
operations minimum
ops. min. (0.5 A 125 VAC), 5
2
(11 1 ms)
2
( 6 1 ms)
(at 1 A 6 VDC)
Single Winding Latching Type Double Winding Latching Type
Maximum 6 ms (set)
Maximum 6 ms (reset)
0.1 to 0.15 W
0.06 to 0.85 W
AL-( ) W-K
1
10
7
10
operations minimum
5
ops. min. (1 A 30 VDC)
0.20 to 0.3 W
0.15 to 0.17 W
A SERIES
AL-D ( ) W-K
2