GCM1885G1H150JA16D Murata Electronics North America, GCM1885G1H150JA16D Datasheet - Page 48

• Manufacturer Part Number: GCM1885G1H150JA16D
• Description: CAP CER 15PF 50V X8G SMD
• Manufacturer: Murata Electronics North America
• Series: GCMr

Specifications of GCM1885G1H150JA16D

• Voltage - Rated: 50V
• Lead Style: *
• Capacitance: 15pF
• Tolerance: ±5%
• Temperature Coefficient: X8G
• Mounting Type: *
• Operating Temperature: -55°C ~ 150°C
• Applications: Automotive
• Ratings: AEC-Q200
• Package / Case: *
• Size / Dimension: *
• Thickness: *
• Lead Spacing: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

3
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
46
No.
Medium Voltage for Automotive Soft Termination Type GCJ Series Specifications and Test Methods
Specifications and Test Methods
1
2
3
4
5
6
7
8
9
Pre-and Post-Stress
Electrical Test
High Temperature
Exposure (Storage)
Temperature
Cycle
Destructive
Physical Analysis
Moisture
Resistance
Biased Humidity
Operational Life
External Visual
Physical Dimension
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AEC-Q200
Test Item
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
The measured and observed characteristics should satisfy the
specifications in the following table.
Within 10%
0.05 max.
More than 10,000M or 100M · F
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
Within 10%
0.05 max.
More than 10,000M or 100M · F
(Whichever is smaller)
No defects or abnormalities
The measured and observed characteristics should satisfy the
specifications in the following table.
Within 12.5%
0.05 max.
More than 10,000M or 100M · F
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
Within 12.5%
0.05 max.
More than 1,000M or 10M · F
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
Within 12.5%
0.05 max.
More than 1,000M or 10M · F
(Whichever is smaller)
No defects or abnormalities
Within the specified dimensions
Specifications
–
Sit the capacitor for 1000 12 hours at 150 3 C. Let sit for 24 2
hours at room temperature, then measure.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (19). Perform the 1000 cycles
according to the 4 heat treatments listed in the following table.
Let sit for 24 2 hours at room temperature, then measure.
Per EIA-469
Apply the 24 hour heat (25 to 65 C) and humidity (80 to 98%)
treatment shown below, 10 consecutive times.
Let sit for 24 2 hours at room temperature, then measure.
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8k
resistor) at 85 3 C and 80 to 85% humidity for 1000 12 hours.
Remove and let sit for 24 2 hours at room temperature, then
measure.
The charge/discharge current is less than 50mA.
Apply voltage in Table for 1000 12 hours at 125 3 C. Let sit
for 24 2 hours at room temperature, then measure.
The charge/discharge current is less than 50mA.
Visual inspection
Using calipers and micrometers
•Pretreatment
•Pretreatment
•Pretreatment
Perform the heat treatment at 150+0/-10 C for 60 5 minutes
and then let sit for 24 2 hours at room temperature.
Perform the heat treatment at 150+0/-10 C for 60 5 minutes
and then let sit for 24 2 hours at room temperature.
Apply test voltage for 60 5 minutes at test temperature.
Remove and let sit for 24 2 hours at room temperature.
Time (min.)
Temp. ( C)
Rated Voltage
Step
-10
DC250V
DC630V
70
65
60
55
50
45
40
35
30
25
20
15
10
-5
C
5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
-55+0/-3
Initial measurement
15 3
1
AEC-Q200 Test Method
Humidity
90-98%
Room Temp.
+10
-2
One cycle 24 hours
150% of the rated voltage
120% of the rated voltage
Humidity
80-98%
C
2
1
Continued on the following page.
Applied Voltage
Humidity
90-98%
Hours
125+3/-0
15 3
3
Humidity
80-98%
Room Temp.
Humidity
90-98%
4
1
C03E.pdf
10.5.20