4032-T-B1_B_470 Silicon Laboratories Inc, 4032-T-B1_B_470 Datasheet - Page 19

• Manufacturer Part Number: 4032-T-B1_B_470
• Description: KIT DEV TEST EZRADIOPRO SI4032
• Manufacturer: Silicon Laboratories Inc
• Type: Transceiverr

Specifications of 4032-T-B1_B_470

• Frequency: 470MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Si4032
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Si4030/31/32-B1
3.2.3. TX State
The TX state may be entered from any of the IDLE modes when the txon bit is set to 1 in "Register 07h. Operating
Mode and Function Control 1". A built-in sequencer takes care of all the actions required to transition between
states from enabling the crystal oscillator to ramping up the PA. The following sequence of events will occur
automatically when going from STANDBY mode to TX mode by setting the txon bit.
1. Enable the main digital LDO and the Analog LDOs.
2. Start up crystal oscillator and wait until ready (controlled by an internal timer).
3. Enable PLL.
4. Calibrate VCO (this action is skipped when the vcocal bit is “0”, default value is “1”).
5. Wait until PLL settles to required transmit frequency (controlled by timer).
6. Activate power amplifier and wait until power ramping is completed (controlled by an internal timer).
7. Transmit packet.
Steps in this sequence may be eliminated depending on which IDLE mode the chip is configured to prior to setting
the txon bit. By default, the VCO and PLL are calibrated every time the PLL is enabled.
3.2.4. Device Status
Add R/W Function/Description
D7
D6
D5
D4
D3
D2
D1
D0
POR Def.
02
R
Device Status
ffovfl
ffunfl
Reserved
Reserved
freqerr
cps[1] cps[0]
—
The operational status of the chip can be read from "Register 02h. Device Status".
Rev 1.1
19